APSYS APFS-6818 18U Floor Standing Server Cabinet, 600 x 800 mm
Price includes warranty
Aptech International
مواصفات المنتج
| Manufacturer Part Number | APFS-6818 |
| Form Factor | Floor Standing |
| Rack Capacity | 18U |
| Width | 600 mm |
| Depth | 800 mm |
| Material | SPCC Cold-Rolled Steel |
New
APSYS APFS-6818 is an 18U floor standing cabinet for mounting standard network and IT rack equipment.
The APSYS APFS-6818 is an 18U floor standing server cabinet with a 600 x 800 mm footprint. It belongs to the standard 19-inch rack platform used for patch panels, switches, routers and other rack-mount equipment. Its front mesh door and double perforated rear door allow airflow through the enclosure. The SPCC cold-rolled steel construction and powder-coated finish suit indoor communications rooms and smaller server deployments. For a refurbished network installation in Doha, Qatar, this cabinet gives an installer a defined rack height and footprint for planning equipment placement. The 18U capacity suits a compact equipment group rather than a full-height rack. Its 800 kg load capacity applies on adjustable feet, so the weight of installed devices and accessories should be considered together. AP-APFS-6818 identifies this cabinet when matching it to an equipment schedule.
AP-APFS-6818Specification
The 18U capacity describes available vertical rack space, while 600 mm width and 800 mm depth describe the cabinet footprint. Allow room around that footprint for access to the front and rear doors, as well as for cable routing. Plan the equipment layout against both the rack height and the space needed for connections.
Installation
Place the cabinet on a level indoor floor and set its adjustable feet before loading equipment. Distribute heavier devices low in the rack, then check that the combined equipment and accessory weight remains within the 800 kg capacity on those feet. Leave clearance for both doors to open and for cables to enter and reach their connections without blocking the front-to-rear airflow path. Position rack-mount equipment within the available 18U and follow each device's mounting and ventilation requirements.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWhat type of equipment is the APSYS APFS-6818 cabinet used for?
This cabinet is intended for standard rack-mount IT and networking equipment. It is commonly used for patch panels, switches, routers, firewalls, and other hardware that fits a 19-inch rack format. It is a good option for structured cabling areas, communications rooms, and smaller server deployments where equipment needs to be mounted in an organised enclosure.
How much rack space does this cabinet provide?
The APFS-6818 provides 18U of rack capacity. That makes it suitable for compact installations that still need enough room for multiple devices, cable management, and accessory mounting. It is often chosen for edge networks, branch offices, and other environments where a full-height cabinet is not necessary.
Does this cabinet support standard 19-inch rack equipment?
Yes, it is designed around common rack standards including ANSI/EIA RS-310-D, IEC 297-2, DIN 41491, and ETSI. Those standards are widely associated with standard rack-mount IT hardware, so the cabinet is intended for equipment that follows conventional 19-inch mounting practices.
What are the door types on this server cabinet?
The cabinet has a front mesh door and a double perforated rear door. This combination is useful in installations where airflow through the enclosure is important, especially when housing active networking devices or other rack-mounted electronics that benefit from ventilation.
What is the cabinet made from?
The APFS-6818 is made from SPCC cold-rolled steel. That material is commonly used in equipment enclosures because it provides a rigid structure for rack installations. The cabinet also has a surface treatment and powder-coated finish for a professional appearance in indoor IT environments.
Is this cabinet suitable for heavier rack installations?
The cabinet has an 800 kg load capacity on the adjustable feet, which makes it suitable for substantial rack-mounted equipment when installed correctly. That capacity is useful for mixed installations that include multiple devices, cabling, and accessories within a compact floor-standing enclosure.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.