Home / الشبكات / محول سيسكو كاتاليست WS-C2960X-48LPS-L بـ 48 منفذ جيجابت PoE+
الانتقال إلى معلومات المنتج
CISCO

محول سيسكو كاتاليست WS-C2960X-48LPS-L بـ 48 منفذ جيجابت PoE+

Refurbished · Tested P/N: SW-CISCO-2960X-48LPS-L
السعر الأصلي QAR 870.00
السعر الأصلي سعر التخفيض QAR 870.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

CISCO

In stock · 2 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية CISCO
الرقم التعريفي للمنتج (SKU) SW-CISCO-2960X-48LPS-L
السلسلة Cisco Catalyst 2960X Series
عدد المنافذ 48 منفذ جيجابت إيثرنت (PoE+)
نوع المحول محول مدار من الطبقة الثانية
دعم نظام التشغيل Cisco IOS
Full specification 11 rows
Cisco Catalyst WS-C2960X-48LPS-L 48 port Gigabit PoE+ switch with 4 SFP uplinks Refurbished · Tested
About this switch

Cisco Catalyst WS-C2960X-48LPS-L, a 48-port Gigabit PoE+ Layer 2 managed access switch with four SFP uplinks for enterprise wiring closets.

The WS-C2960X-48LPS-L is a refurbished Cisco Catalyst 2960X Series access switch with 48 Gigabit Ethernet ports, all PoE+ capable, and four SFP uplink ports for connections to the distribution layer or core. It runs Cisco IOS with the LAN Base feature set, which the L at the end of the model code denotes. It stacks with other 2960X switches, so a closet can be managed as a single unit. The 370 W PoE budget suits a floor of IP phones, wireless access points and cameras where not every port draws full PoE+ power. Buyers in Qatar typically choose it to replace a failed 2960X in an existing stack, or to add 48 powered ports to a closet already standardised on Catalyst access switches. We list it as SW-CISCO-2960X-48LPS-L and hold units in Doha for organisations that need a like-for-like Cisco model without a long wait.

Access ports
48 x GbE PoE+
Uplinks
4 x SFP
PoE budget
370 W
Switch type
Layer 2 managed
SKU SW-CISCO-2960X-48LPS-L

Specification

The 2960X is Cisco's fixed-configuration Gigabit access platform, and the LPS variant is the 48-port model with a partial PoE+ budget. The 370 W budget is shared across all 48 ports, so plan for about 12 ports at the full 30 W PoE+ figure, or many more at typical phone and access point draw.

ModelWS-C2960X-48LPS-L
SeriesCisco Catalyst 2960X
Switch typeLayer 2 managed
Access ports48 x Gigabit Ethernet
Power over EthernetPoE+ on all 48 access ports
PoE budget370 W total
Maximum PoE+ per port30 W
Uplink ports4 x 1 Gigabit SFP
Operating systemCisco IOS
Feature setLAN Base
StackingYes, up to 8 switches with the optional stacking module
Stack bandwidth80 Gbps
Unicast MAC addresses16,000
DRAM512 MB
Flash128 MB
Management interfacesConsole port, USB console port, Ethernet management port, USB storage port
Power supplyFixed internal AC
Rack units1
Mounting19 inch rack

Installation

The switch mounts in a standard 19 inch rack and occupies one rack unit. Leave clear space around the vents so the fans can move air freely, especially in a closet that also houses a UPS or patch panels. For first configuration, connect to the console port or the USB console port and set the management address before patching it into the live network.

To join an existing stack, fit the stacking module in the rear slot of each member and bring every switch to the same Cisco IOS release before connecting the stack cables. SFP transceivers are ordered separately, so choose modules that match the fibre type and distance to the upstream switch. Add up the expected draw of phones, access points and cameras before connecting them, and keep the total inside the 370 W PoE budget.

Part numbers and identification

Cisco product IDWS-C2960X-48LPS-L
Serverdove SKUSW-CISCO-2960X-48LPS-L
Series alias2960X

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.