Home / قطع الغيار والملحقات / مشتت حراري ومروحة لوحدة المعالجة المركزية من Dell طراز 1TD00 لمحطات عمل Precision
الانتقال إلى معلومات المنتج
DELL

مشتت حراري ومروحة لوحدة المعالجة المركزية من Dell طراز 1TD00 لمحطات عمل Precision

Refurbished · Tested P/N: HS-DELL-1TD00-FAN
السعر الأصلي QAR 270.00
السعر الأصلي سعر التخفيض QAR 270.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

DELL

In stock · 1 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية DELL
رقم تعريف المخزون HS-DELL-1TD00-FAN
رقم قطعة Dell 1TD00
نوع المنتج وحدة تبريد ومروحة لوحدة المعالجة المركزية
التوافق Precision T3600
التوافق Precision T5600
Full specification 11 rows
Dell 1TD00 CPU heatsink and fan assembly for Precision T3600 T5600 T7600 T7610 Refurbished · Tested
About this heatsink assembly

Dell 1TD00 CPU heatsink and fan assembly, the OEM cooling module for Precision T3600, T5600, T7600 and T7610 workstations, refurbished.

Dell part 1TD00 is the combined processor heatsink and fan for the Precision T3600, T5600, T7600 and T7610 tower workstations, the LGA2011 generation of Dell's professional desktops. Unlike a server heatsink, it carries its own fan in a shroud that bolts to the heatsink, and it is the module that must be replaced when a workstation's processor fan fails or when a second processor is added to a T7600 or T7610. It is refurbished. Buyers in Qatar order 1TD00 to cure the overheating or fan error that these workstations report as they age, or to complete a second socket, and ServerDove keeps it in Doha stock for the many Precision towers of that generation still at work.

Part number
1TD00
Type
Heatsink and fan
Fits
T3600 to T7610
Socket
LGA2011
SKU HS-DELL-1TD00-FAN
WorkstationGenerationNote
Dell Precision T3600 and T5600LGA2011, single and dual socketNamed as compatible
Dell Precision T7600 and T7610LGA2011, dual socketNamed as compatible

Dell's diagnostic lights and the pre-boot message identify which processor fan has failed on a dual socket T7600 or T7610, so the correct one of two identical assemblies is replaced.

Specification

Product typeCPU heatsink and fan assembly
CompatibilityDell Precision T3600, T5600, T7600, T7610
ApplicationWorkstation CPU cooling module
Part typeOEM Dell replacement part

The assembly cools the Xeon E5 processors of the first and second LGA2011 generations, including the 130W and 150W parts fitted to the T7600 and T7610, and its fan connects to the system board's processor fan header so speed follows processor temperature. A fan that has stopped shows as a fan failure message at power on and the workstation may refuse to boot until it is replaced, which is the usual reason this part is ordered.

Installation

Unplug the workstation and open the side panel. Disconnect the fan cable from the board, loosen the four captive screws of the old assembly in a cross pattern and lift it off. Clean the processor, apply fresh thermal compound, seat the 1TD00 squarely and tighten its screws evenly, then connect the fan cable to the processor fan header. Power on and check that the fan spins and no fan error appears.

Part numbers and identification

SKUHS-DELL-1TD00-FAN
Dell part number1TD00

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.