Home / التخزين / محرك أقراص الحالة الصلبة للمؤسسات من Dell EMC Samsung PM883 سعة 960 جيجابايت ساتا 6 جيجابت/ثانية 2.5 بوصة
الانتقال إلى معلومات المنتج
DELL

محرك أقراص الحالة الصلبة للمؤسسات من Dell EMC Samsung PM883 سعة 960 جيجابايت ساتا 6 جيجابت/ثانية 2.5 بوصة

Refurbished · Tested P/N: SSD-DELL-PM883-960G-SATA
السعر الأصلي QAR 620.00
السعر الأصلي سعر التخفيض QAR 620.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

DELL

In stock · 2 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية DELL
السعة 960 جيجابايت
عامل الشكل 2.5 بوصة SFF
الواجهة SATA 6Gb/s
السلسلة Samsung PM883
النموذج MZ-7LH960A
Full specification 10 rows
Dell EMC Samsung PM883 960GB SATA 2.5 inch enterprise SSD 0PMT4X Refurbished · Tested
About this ssd

Dell EMC Samsung PM883 960GB SATA 6Gb/s 2.5 inch read intensive SSD, Dell part 0PMT4X, for PowerEdge server storage.

This is the Samsung PM883 960GB enterprise SSD (model MZ-7LH960A) in its Dell-branded form, with Samsung part number MZ7LH960HAJR0D3 and Dell part number 0PMT4X. The Samsung part number denotes the Dell firmware variant, so PERC controllers and iDRAC in Dell PowerEdge servers recognise it as a Dell part and do not raise the non-certified drive warnings a retail PM883 can trigger. It is a 2.5 inch 7mm SATA 6Gb/s drive built on Samsung V-NAND TLC flash and rated at 1.3 drive writes per day over three years, which places it in the read intensive class. This refurbished drive suits administrators and integrators in Doha and across Qatar who are populating or expanding PowerEdge rack and tower servers with SATA flash. Typical roles are boot and operating system volumes, hypervisor datastores for lightly written virtual machines, web and application servers, content caches and read-heavy databases.

Capacity
960GB
Interface
SATA 6Gb/s
Endurance
1.3 DWPD
Dell part
0PMT4X
SKU SSD-DELL-PM883-960G-SATAForm factor 2.5 inch, 7mm

Specification

The PM883 runs on a SATA 6Gb/s link, so its sequential figures sit at the ceiling of that interface. The practical gain over a SATA hard disk comes from far lower random access latency. The endurance rating of 1.3 DWPD on 960GB works out at roughly 1.25 TB written per day for three years; transaction logs, write caching and write-dominated databases are better placed on a mixed use or write intensive drive.

ManufacturerSamsung (Dell branded)
ModelPM883
Capacity960GB
InterfaceSATA 6Gb/s
Form factor2.5 inch SFF, 7mm height
Drive classSSD, read intensive
Flash typeSamsung V-NAND TLC
Endurance1.3 DWPD over 3 years (Samsung rating)
Sequential readUp to 550 MB/s (manufacturer specification)
Sequential writeUp to 520 MB/s (manufacturer specification)
Hot-plugYes, when fitted in a server hot-swap carrier

Installation

This is a bare 2.5 inch 7mm drive. To use it in a PowerEdge hot-swap bay, mount it in the Dell carrier that matches the server generation, as carrier designs differ between generations. In a fixed internal 2.5 inch bay or on a cabled SATA port it can be mounted directly. Once in a hot-swap carrier it can be inserted with the server running, and it will appear in the PERC configuration utility and iDRAC as a Dell drive.

SAS controllers and backplanes generally accept SATA drives, so it works on PERC controllers that support SATA devices, with the link running at SATA 6Gb/s. Most PERC controllers do not allow SAS and SATA drives in the same virtual disk, and mixing SSDs with hard disks in one array is normally blocked or not recommended. When replacing spinning disks, build a separate SSD virtual disk or replace every member of the array with SSDs. A replacement for a failed array member should be the same capacity or larger.

Part numbers and identification

SKUSSD-DELL-PM883-960G-SATA
Dell part number0PMT4X
Samsung part numberMZ7LH960HAJR0D3
Samsung model numberMZ-7LH960A
Model seriesPM883

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.