Home / Rack Rails & Accessories / Dell PowerEdge R640 Rail Kit قضبان تثبيت للرفوف قابلة للانزلاق
الانتقال إلى معلومات المنتج
DELL

Dell PowerEdge R640 Rail Kit قضبان تثبيت للرفوف قابلة للانزلاق

Refurbished · Tested P/N: RAIL-DELL-R640
السعر الأصلي QAR 270.00
السعر الأصلي سعر التخفيض QAR 270.00
تخفيض نفدت الكمية

Price includes warranty

DELL

In stock · 8 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

Compatibility Dell PowerEdge R640
Installation تركيب بدون أدوات
Rack Depth Support دعم قابل للتعديل لعمق الرف
Rails Included قضبان داخلية وخارجية
Mounting Type عدة قضبان منزلقة للتثبيت على الرف
Server Size خوادم الرف 1U
Full specification 9 rows
Dell PowerEdge R640 sliding rack mount rail kit Refurbished · Tested
About this rail kit

Dell PowerEdge R640 sliding rail kit with inner and outer rails for mounting the 1U server in a four-post rack.

This is a refurbished sliding rail kit, stock code RAIL-DELL-R640, for the Dell PowerEdge R640, the 1U two-socket rack server from Dell's 14th generation. Inner rails fit to the sides of the R640 chassis and outer rails fit to the front and rear posts of a four-post rack. The outer rails adjust for rack depth and installation is tool-less. Because the rails slide, the server can be drawn forward out of the rack to reach its top cover, so drive, memory, fan and riser work can be done without unracking the chassis or disturbing neighbouring units. Buyers in Qatar source this kit when an R640 arrives without rails, when rails were left behind in a decommissioned cabinet, or when a server moves between sites and needs mounting hardware at the destination. Integrators building R640 clusters in Doha and IT teams maintaining existing 14th generation estates use matching kits to keep mounting consistent across a row of 1U servers.

Fits
PowerEdge R640
Installation
Tool-less
Rack type
Four-post
Rack depth
Adjustable
SKU RAIL-DELL-R640Form factor 1U rack

Rail kits are matched to the height and depth of a specific chassis, and rail types differ between PowerEdge models. This kit is sized for the R640.

ServerGenerationNote
PowerEdge R64014th generation1U two-socket rack server, the fitment the kit is sized for

Two-post telecom-style racks do not give the rear support a sliding rail needs to hold an extended server, so a different mounting solution is used there.

Specification

The R640 is a 1U chassis, so a server on these rails occupies a single rack unit and R640s can be stacked directly above one another. A sliding rail carries the server while it is extended, which needs support at both the front and rear posts; that is why the kit is for four-post racks.

Download spec sheet (PDF)
ManufacturerDell
TypeSliding rail kit
Compatible seriesDell PowerEdge R640
Server generationDell PowerEdge 14th generation
Server form factor1U rack
Rail designInner rails (chassis) and outer rails (rack)
InstallationTool-less
Rack depthAdjustable
Rack typeFour-post rack

Installation

Before installation day, measure the distance between the front and rear rack posts and check the rack's hole type, because mounting differs between rack designs. The outer rails latch onto the front and rear posts without screwdrivers, and the inner rails clip onto the sides of the R640 chassis. With both outer rails latched at the same rack unit on each side, align the inner rails with the outer rails and slide the server in until it locks. Lifting a loaded server onto rails is safer with two people. Leave enough slack in the power and network cables at the rear so the server can be drawn forward for service without pulling connections.

Part numbers and identification

SKURAIL-DELL-R640

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.