Home / Power & UPS / مزود الطاقة Dell Precision T7910 1300W 80 Plus Gold موديل H1300EF-02
الانتقال إلى معلومات المنتج
DELL

مزود الطاقة Dell Precision T7910 1300W 80 Plus Gold موديل H1300EF-02

Refurbished · Tested P/N: PSU-DELL-1300W-H1300EF02
السعر الأصلي QAR 420.00
السعر الأصلي سعر التخفيض QAR 420.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

DELL

Out of stock
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية DELL
النموذج H1300EF-02
رقم القطعة 0T31JM
مخرج الطاقة 1300 واط
الكفاءة 80 Plus Gold
التوافق Dell Precision T7910
Full specification 7 rows
Dell H1300EF-02 1300W 80 Plus Gold power supply for Precision T7910, part 0T31JM Refurbished · Tested
About this power supply

Dell 1300W 80 Plus Gold power supply H1300EF-02, part number 0T31JM, the internal ATX form power module for the Precision T7910 workstation, refurbished.

The H1300EF-02, Dell part number 0T31JM, is the 1300W power supply fitted to the Precision T7910 tower workstation, rated 80 Plus Gold. It is the supply Dell specified for T7910 configurations with two processors and two high end graphics cards, and it is the unit fitted to ServerDove's own T7910 workstation. An internal ATX form module, it slides into the chassis power bay and connects through Dell's harness. It is refurbished. Buyers in Qatar fit 0T31JM to replace a failed T7910 supply or to upgrade a workstation that shipped with a lower rating before adding a second processor or a large graphics card. ServerDove keeps it in Doha stock.

Output
1300W
Model
H1300EF-02
Part number
0T31JM
Efficiency
80 Plus Gold
SKU PSU-DELL-1300W-H1300EF02
SystemGenerationNote
Dell Precision T7910Dual socket Xeon E5 v3 and v4 towerTop rated supply for the chassis

Buyers of ServerDove's own T7910 workstation, which carries this exact supply, can obtain a spare or replacement from the same stock. A failing Precision supply usually shows as random shutdowns under graphics load or a refusal to power on with the diagnostic light amber, and a replacement of the same rating is the straightforward cure. Because the unit is a sealed module, it is swapped rather than repaired.

Specification

Power output1300W
Efficiency80 Plus Gold
CompatibilityDell Precision T7910
Form factorInternal ATX power module

Thirteen hundred watts is well above what most T7910 builds draw, but it is the rating the chassis needs for two 160W processors and two 250W graphics cards with margin, and the Gold efficiency keeps heat low at typical loads. Like all Precision supplies it uses Dell's connector layout and bay, so a retail ATX unit is not a substitute.

Installation

Unplug the workstation, open the side panel, release the supply latch at the rear of the chassis and slide the old unit out; slide the H1300EF-02 in until it engages the chassis connector and the latch closes. No internal cables are disturbed. Reconnect mains and confirm the supply's self test light shows normal before powering on.

Part numbers and identification

SKUPSU-DELL-1300W-H1300EF02
ModelH1300EF-02
Dell part number0T31JM

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.