تعذّر تحميل معلومات الاستلام
HGST Ultrastar C10K900 HUC109060CSS600 600GB 10K SAS 6Gb/s 2.5" Hard Drive
Price includes warranty
HGST
مواصفات المنتج
| Product Family | Ultrastar C10K900 |
| Capacity | 600GB |
| Interface | SAS |
| Interface Speed | 6Gb/s |
| Form Factor | 2.5-inch (SFF) |
| Drive Type | Hard disk drive (HDD) |
Refurbished · Tested
HGST Ultrastar C10K900 HUC109060CSS600, a refurbished 600GB 10K SAS 6Gb/s 2.5-inch hard drive for rack servers and storage arrays.
The HUC109060CSS600 is a 600GB hard drive from HGST's enterprise Ultrastar C10K900 family, built in the 2.5-inch small form factor with a 6Gb/s SAS interface. It spins at 10,000 RPM, carries a 64MB cache and uses native 512-byte sectors. That places it in the performance tier of spinning disks, between 7,200 RPM nearline drives and 15,000 RPM drives, with shorter access times than nearline models. Administrators and integrators in Doha and elsewhere in Qatar buy this refurbished drive to replace a failed member of an existing SAS array, to expand a set built from the same C10K900 model, or to keep a spare on the shelf for a 2.5-inch SAS server. It suits random I/O work such as database files, virtual machine stores, mail servers and application volumes, where cost per GB still favours hard drives over flash.
HDD-HGST-HUC109060CSS600Specification
The values below are the ones that decide whether the drive will join an existing array: interface, form factor, spindle speed and sector size. Capacity is the formatted size before RAID overhead.
SAS is backward compatible, so a 12Gb/s controller or backplane sets up the link at 6Gb/s with this drive. A single 10K drive is limited by spindle speed and media rate well before the 6Gb/s link, so running it alongside faster drives changes little for the drive itself. The drive needs a SAS host bus adapter or RAID controller and will not run from SATA-only ports; the SAS connector is keyed so it does not fit a standard SATA cable.
Installation
Most rack servers and storage enclosures mount drives in a carrier specific to the vendor and generation, which seats the drive against the backplane and shows its status LEDs, so fit the drive into the carrier that matches your server. In a hot-swap SAS backplane the drive can be inserted with the server running, and the RAID controller will then start a rebuild or offer it as a new disk. When replacing an array member, match the sector format and spindle speed of the other drives; using the same model number is the simplest way to do that. In a 3.5-inch bay the drive needs a 2.5-inch to 3.5-inch adapter or a hybrid carrier designed for that server, placing the connector where the backplane expects it.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWill the HUC109060CSS600 work on a SATA port?
No. This is a SAS drive and needs a SAS host bus adapter or RAID controller. A SAS controller can usually also run SATA drives, but a SATA-only controller or motherboard port cannot run a SAS drive. The connector on a SAS drive is also keyed so that it does not fit a standard SATA cable.
Can I use this 6Gb/s drive with a 12Gb/s SAS controller?
Yes. SAS is backward compatible, so a 12Gb/s SAS-3 controller or backplane sets up the link at 6Gb/s with this drive. Spindle speed and media rate limit a single 10K hard drive's throughput well before the 6Gb/s link does. Mixing it with faster drives in one array therefore makes little difference to that drive's own performance.
What spindle speed and cache does the C10K900 600GB have?
The HUC109060CSS600 spins at 10,000 RPM and has a 64MB cache. This places it in the performance tier of spinning drives, between 7,200 RPM nearline drives and 15,000 RPM drives. It is used where random-access response matters but capacity per bay and cost still favour hard drives over SSDs.
What sector size does this drive use?
The HUC109060CSS600 uses 512-byte sectors. This is the format most older RAID controllers and operating systems expect. When adding a drive to an existing array, the sector format should match the other members. Matching the exact model number is the simplest way to make sure it does.
Does this drive fit a 3.5-inch bay?
Not directly. It is a 2.5-inch small form factor drive, intended for SFF bays. In a 3.5-inch bay it needs a 2.5-to-3.5-inch adapter or a hybrid carrier designed for the server in question. Check that the adapter places the connector where the backplane expects it.
Do I need a drive carrier to install it in a server?
Most rack servers and storage enclosures mount drives in carriers specific to that vendor and generation. These are needed to seat the drive against the hot-swap backplane and to show its status LEDs. The drive itself uses a standard SAS connector, so the carrier is what has to match the server.
How does the C10K900 differ from other Ultrastar 10K drives?
The Ultrastar C10K900 is a 2.5-inch 10K SAS family in which 600GB is one of several capacities. The model number shows which drive it is: HUC1090 identifies the C10K900 family and 60 the 600GB capacity. Other Ultrastar 10K families differ in generation, interface speed and capacity range, so match the full part number when replacing an array member.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.