Home / SAS Hard Drives / محرك أقراص ثابتة HP SAS SFF سعة 146 جيجابايت 15 ألف دورة في الدقيقة مع غطاء HP
الانتقال إلى معلومات المنتج
ServerDove

محرك أقراص ثابتة HP SAS SFF سعة 146 جيجابايت 15 ألف دورة في الدقيقة مع غطاء HP

Refurbished · Tested P/N: HDD-HP-146G-15K-SAS-CADDY
السعر الأصلي QAR 60.00
السعر الأصلي سعر التخفيض QAR 60.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

ServerDove

In stock · 24 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

السعة 146 جيجابايت
عامل الشكل 2.5 بوصة SFF
سرعة الدوران 15 ألف دورة في الدقيقة
الواجهة SAS 6 جيجابت/ثانية
يشتمل على HPE Drive Caddy
التوافق خوادم HPE ProLiant
Full specification 8 rows
HPE 146GB 15K SAS 2.5 inch hard drive in HPE SFF hot plug caddy Refurbished · Tested
About this drive

HP 146GB 15K rpm SAS 6Gb/s 2.5 inch hard drive supplied in an HPE hot-plug caddy, ready to slide into a ProLiant server, refurbished.

This is a 146GB 15,000 rpm SAS 6Gb/s hard drive in the 2.5 inch small form factor, supplied already mounted in an HPE drive caddy, so it goes straight into the hot-plug bay of a ProLiant server. The 146GB 15K drive was the standard fast boot and database drive of ProLiant G6, G7 and Gen8 servers, and the caddy is the part that is often missing when a bare replacement is bought. It is refurbished and sold with the caddy included. Buyers in Qatar use it to replace a failed drive in an older ProLiant array, or to add a mirrored boot pair to a refurbished server, without hunting for a carrier separately. ServerDove keeps it in Doha stock.

Capacity
146GB
Speed
15K rpm
Interface
SAS 6Gb/s
Caddy
HPE, included
SKU HDD-HP-146G-15K-SAS-CADDYForm factor 2.5 inch SFF

Specification

Capacity146GB
Form factor2.5 inch SFF
Spindle speed15K rpm
InterfaceSAS 6Gb/s
Hot-plug supportYes
CompatibilityHPE ProLiant servers
IncludedHPE drive caddy

The caddy is the HPE SmartDrive carrier or its predecessor, depending on the generation of the server the drive came from; both carry the drive in a G6 to Gen10 SFF bay, though the two carrier styles are not interchangeable with each other, so match the caddy style to the server's other drives. At 15K rpm the drive offers the fastest access time of any mechanical drive, which is what these bays were designed for.

What is included

  • HP 146GB 15K rpm SAS 6Gb/s 2.5 inch hard drive
  • HPE hot-plug drive caddy, fitted

Keep the caddy when the drive is eventually retired: HPE carriers are reused across drive replacements, and an SSD in the same carrier is the natural successor to a 15K drive in a boot bay.

Installation

With the server running, open the bay's blank or remove the failed drive by releasing its latch, slide this drive and caddy in until the lever clicks home, and watch the drive LED: the Smart Array controller recognises the drive and begins rebuilding a degraded logical drive automatically. A 146GB rebuild finishes in under an hour. For a new logical drive, use the controller's configuration utility to create it from matching drives.

Part numbers and identification

SKUHDD-HP-146G-15K-SAS-CADDY

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.