Home / التخزين / HPE 4TB 7.2K SATA 3.5" محرك أقراص صلبة للمؤسسات 657753-008
الانتقال إلى معلومات المنتج
HPE

HPE 4TB 7.2K SATA 3.5" محرك أقراص صلبة للمؤسسات 657753-008

Refurbished · Tested P/N: HDD-HP-4TB-7K2-SATA
السعر الأصلي QAR 320.00
السعر الأصلي سعر التخفيض QAR 320.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

HPE

In stock · 1 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
وحدة حفظ المخزون HDD-HP-4TB-7K2-SATA
رقم جزء HPE 657753-008
السعة 4TB
عامل الشكل 3.5 بوصة LFF
الواجهة SATA
Full specification 12 rows
HPE 4TB 7.2K SATA 3.5 inch enterprise hard drive 657753-008 Refurbished · Tested
About this drive

HPE 4TB 7.2K SATA 3.5 inch enterprise hard drive, part number 657753-008, a hot-plug LFF capacity drive for ProLiant servers, refurbished.

HPE part 657753-008 is a 4TB 7,200 rpm SATA hard drive in the 3.5 inch large form factor, HPE's midline capacity drive for ProLiant servers with LFF bays. Midline drives are enterprise rated for continuous operation but use the SATA interface, which keeps the cost per terabyte down for backup, archive and file storage. It supports hot-plug and is recognised by Smart Array controllers as an HPE drive. It is refurbished and sold as a bare drive. Buyers in Qatar use 657753-008 to fill the LFF bays of a ProLiant storage or backup server, twelve of them giving a StoreEasy 1650 48TB raw, and to replace failed members of existing SATA arrays with the matching part. ServerDove keeps it in Doha stock.

Capacity
4TB
Speed
7,200 rpm
Interface
SATA
HPE part
657753-008
SKU HDD-HP-4TB-7K2-SATAForm factor 3.5 inch LFF

Specification

Capacity4TB
Form factor3.5 inch LFF
InterfaceSATA
Spindle speed7,200 rpm
Drive typeEnterprise hard drive
CompatibilityHPE ProLiant servers
Hot-plug supportYes

SATA drives in a ProLiant connect through the same SmartDrive carrier and backplane as SAS drives and work on any Smart Array controller, with the difference that a SATA drive has one port rather than two, which matters only in dual controller enclosures. Throughput of around 150 megabytes per second per drive and a rebuild time of many hours for 4TB argue for RAID 6 in sets of six or more, or RAID 10 where write performance matters.

Midline SATA drives are HPE's answer for capacity at low cost, and the part number follows a family: the 008 suffix marks a later revision of the same 4TB drive, and any revision of 657753 fits the same slots and arrays. For an archive or backup server the drive's continuous duty rating is what separates it from a desktop 4TB drive that would fail early in a hot server chassis.

Installation

Fit the drive in an HPE LFF SmartDrive carrier, not included, and slide it into a running server; the Smart Array controller identifies it by HPE part number and starts a rebuild if one is pending, or the drive can be added to an array or set as a spare through Smart Storage Administrator. Keep an array's members on the same firmware level using HPE's update tools, and leave a rebuild to finish before adding load.

Part numbers and identification

SKUHDD-HP-4TB-7K2-SATA
HPE part number657753-008

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.