Home / Power & UPS / مزود الطاقة HPE 500W Flex Slot 865399-001
الانتقال إلى معلومات المنتج
HPE

مزود الطاقة HPE 500W Flex Slot 865399-001

Refurbished · Tested P/N: PSU-HP-500W-865399-001
السعر الأصلي QAR 240.00
السعر الأصلي سعر التخفيض QAR 240.00
تخفيض نفدت الكمية

Price includes warranty

HPE

Out of stock
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
رقم القطعة PSU-HP-500W-865399-001
رقم جزء HPE 865399-001
مخرج الطاقة 500 واط
عامل الشكل وحدة تزويد الطاقة Flex Slot
الكفاءة 80 بلس بلاتينيوم
Full specification 10 rows
HPE 865399-001 500W Flex Slot Platinum hot plug power supply for ProLiant Gen10 Refurbished · Tested
About this power supply

HPE 500W Flex Slot power supply, part number 865399-001, an 80 Plus Platinum hot-plug redundant PSU for ProLiant DL360 and DL380 Gen10 servers, refurbished.

HPE part 865399-001 is the 500W Flex Slot power supply for ProLiant Gen10 servers, rated 80 Plus Platinum and built for hot-plug redundant operation in the Flex Slot bays of the DL360 Gen10 and DL380 Gen10. Flex Slot is HPE's shared power supply form factor for Gen9 and Gen10, in which the same bay takes 500W, 800W, 1600W and other ratings, so a chassis can be fitted with the wattage its configuration needs. Five hundred watts covers a modestly configured dual processor server. It is refurbished. Buyers in Qatar use 865399-001 to replace a failed Gen10 supply, to add the second unit for redundancy, or to complete a Gen10 barebone. ServerDove keeps it in Doha stock alongside the DL360 and DL380 Gen10 chassis.

Output
500W
HPE part
865399-001
Efficiency
80 Plus Platinum
Generation
ProLiant Gen10
SKU PSU-HP-500W-865399-001Form factor Flex Slot
ServerGenerationNote
HPE ProLiant DL360 Gen10Gen10, 1UFlex Slot bay, named as supported
HPE ProLiant DL380 Gen10Gen10, 2UFlex Slot bay, named as supported

Specification

Power output500W
Form factorFlex Slot
Efficiency80 Plus Platinum
Power typeHot-plug, redundant
CompatibilityHPE ProLiant Gen10 servers
Supported modelsDL360 Gen10, DL380 Gen10

Both supplies in a redundant pair must be the same wattage and efficiency grade; a 500W unit beside an 800W unit runs in a mismatched state that iLO reports. Five hundred watts suits servers with two mid-range processors and a handful of drives; a fully loaded DL380 Gen10 with high wattage processors and many drives needs the 800W part. The supply accepts 100 to 240V input.

Installation

With a second healthy supply present, replace a failed unit while the server runs: remove the cord, press the release latch, slide the old supply out, push this one in until it clicks, and reconnect the cord; the LED turns green and iLO shows two supplies. On a single supply server, shut down first. No tools are needed; a C13 cord is required and not included.

Part numbers and identification

SKUPSU-HP-500W-865399-001
HPE part number865399-001

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.