Home / SAS Hard Drives / محرك أقراص صلبة للمؤسسات HPE 900GB SAS 10K 2.5 بوصة لخوادم المؤسسات
الانتقال إلى معلومات المنتج
HPE

محرك أقراص صلبة للمؤسسات HPE 900GB SAS 10K 2.5 بوصة لخوادم المؤسسات

Refurbished · Tested P/N: HDD-HP-900G-10K-SAS
السعر الأصلي QAR 150.00
السعر الأصلي سعر التخفيض QAR 150.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

HPE

Out of stock
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
رقم المنتج (SKU) HDD-HP-900G-10K-SAS
السعة 900 جيجابايت
عامل الشكل 2.5 بوصة (SFF)
الواجهة SAS 6 جيجابت/ثانية
سرعة الدوران 10 آلاف دورة في الدقيقة
Full specification 9 rows
HPE 900GB 10K SAS 2.5 inch hard drive 718159-001 Refurbished · Tested
About this drive

HPE 900GB SAS 6Gb/s 10K 2.5 inch enterprise hard drive, part number 718159-001, a hot-plug SFF drive for ProLiant servers, refurbished.

HPE part 718159-001 is a 900GB 10,000 rpm SAS hard drive on a 6Gb/s interface in the 2.5 inch small form factor, the mid-capacity performance drive HPE fitted to ProLiant G7, Gen8 and Gen9 servers. It supports hot-plug in the ProLiant SFF bays and is recognised by Smart Array controllers as an HPE drive, so the server's health monitoring and predictive failure alerts work as they would with a factory drive. It is refurbished and sold as a bare drive. Buyers in Qatar use 718159-001 to replace a failed member of a 10K array in an older ProLiant with the matching HPE part, or to build a RAID 10 set for a database or hypervisor on a refurbished Gen9 server. ServerDove keeps it in Doha stock.

Capacity
900GB
Speed
10K rpm
Interface
SAS 6Gb/s
HPE part
718159-001
SKU HDD-HP-900G-10K-SASForm factor 2.5 inch SFF

Specification

Capacity900GB
Form factor2.5 inch SFF
InterfaceSAS 6Gb/s
Spindle speed10K rpm
CompatibilityHPE ProLiant servers
Hot-plug supportYes

Nine hundred gigabytes at 10K rpm was the sweet spot of the 6Gb/s SAS era: roughly twice the capacity of the 450GB drives it replaced at the same performance, with sequential throughput near 200 megabytes per second and the random access of a 10K spindle. Six or eight of them in RAID 10 still make a respectable database volume where flash is not justified. The 6Gb/s interface runs at full speed on 12Gb/s controllers of later ProLiant generations, so the drive is also a low cost way to fill spare bays in a Gen10 server for bulk storage.

Installation

Fit the drive in an HPE SmartDrive carrier, or the earlier G7 carrier for older servers, neither of which is included, and slide it into a bay while the server is running. The Smart Array controller identifies it, and if the logical drive is degraded the rebuild begins automatically; otherwise assign it through the Smart Storage Administrator as a new array member or a spare. Keep drives in an array to the same part number and firmware level, which HPE's update tools maintain.

Part numbers and identification

SKUHDD-HP-900G-10K-SAS
HPE part number718159-001

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.