Home / خوادم HPE ProLiant DL360 Gen9 / طقم مبرد المعالج HPE DL360 Gen9
الانتقال إلى معلومات المنتج
ServerDove

طقم مبرد المعالج HPE DL360 Gen9

Refurbished · Tested P/N: HPE-DL360G9-HEATSINK
السعر الأصلي QAR 180.00
السعر الأصلي سعر التخفيض QAR 180.00
تخفيض نفدت الكمية

Price includes warranty

ServerDove

In stock · 8 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية ServerDove
رقم المنتج HPE-DL360G9-HEATSINK
نوع المنتج طقم مبرد لوحدة المعالجة المركزية
الفئة قطع غيار وملحقات
الفئة الفرعية قطع غيار الخوادم
HPE ProLiant DL360 Gen9 CPU heatsink Refurbished · Tested
About this heatsink kit

HPE ProLiant DL360 Gen9 CPU heatsink kit, the 1U processor heatsink needed to fit a second or replacement processor, refurbished.

This is the processor heatsink for the HPE ProLiant DL360 Gen9, the 1U rack server of the Xeon E5 v3 and v4 generation. A DL360 Gen9 supplied with one processor has an empty second socket with no heatsink, and a bare processor cannot be fitted without one; this kit is the HPE part that completes the second socket, or replaces a heatsink that was lost or damaged. It is refurbished and specific to the DL360 Gen9 chassis. Buyers in Qatar order it together with a second processor when upgrading a single socket DL360 Gen9 to two, which is the most common upgrade on that server, and ServerDove keeps it in Doha stock alongside the processors and the barebone chassis.

Server
HPE DL360 Gen9
Type
CPU heatsink
Category
Server part
SKU HPE-DL360G9-HEATSINKForm factor 1U
Product typeCPU heatsink kit
CategoryParts and accessories, server parts
CompatibilityHPE ProLiant DL360 Gen9

HPE made two heatsinks for the DL360 Gen9: a standard one for processors up to 135W and a high performance one for the hotter parts. Heatsinks are matched to the chassis airflow and mounting pattern, so a DL380 Gen9 or Gen8 heatsink does not fit this server. A DL360 Gen9 also needs its second processor fan set fitted when the second socket is populated, which HPE supplies separately.

The heatsink is a low profile copper and aluminium unit sized to the 1U chassis height, with captive spring loaded screws that set the correct mounting pressure automatically, so no torque tool is needed. HPE ships new heatsinks with a thermal pad already applied; a refurbished one needs a fresh application of thermal compound before use, and the old compound must be cleaned from the processor if it is being reused.

Installation

Power the server down and unplug it, remove the lid and the air baffle over the processors. Fit the processor to the socket first, then apply thermal compound in a thin even layer, or use the pre-applied pad if the heatsink has one, and lower the heatsink squarely onto the processor. Tighten the four captive screws in a cross pattern to the stop, refit the baffle and lid, and check after boot that iLO reports both processors at normal temperature.

Part numbers and identification

SKUHPE-DL360G9-HEATSINK
ServerHPE ProLiant DL360 Gen9

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.