Home / خوادم HPE ProLiant DL380 Gen10 / وحدة مروحة تبريد HPE DL380 Gen10
الانتقال إلى معلومات المنتج
HPE

وحدة مروحة تبريد HPE DL380 Gen10

Refurbished · Tested P/N: FAN-HP-DL380-G10
السعر الأصلي QAR 85.00
السعر الأصلي سعر التخفيض QAR 85.00
تخفيض نفدت الكمية

Price includes warranty

HPE

In stock · 4 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
رمز المنتج (SKU) FAN-HP-DL380-G10
نوع المنتج وحدة مروحة تبريد
التوافق HPE DL380 Gen10
الميزة مروحة تبريد خادم قابلة للتبديل السريع
الميزة وحدة تبريد عالية الأداء
Full specification 12 rows
HPE ProLiant DL380 Gen10 hot plug cooling fan module Refurbished · Tested
About this fan module

HPE ProLiant DL380 Gen10 cooling fan module, the hot-plug OEM replacement fan with tool-less fitting for the 2U server's fan bay, refurbished.

This is the cooling fan module for the HPE ProLiant DL380 Gen10, the hot-plug fan that sits in the row behind the drive cage and pushes air through the processors, memory and expansion cards of the 2U chassis. It is an OEM HPE replacement part with tool-less installation, refurbished, and it serves both to replace a failed fan and to fill the empty positions when a second processor is added to a server that shipped with one. Buyers in Qatar order it when iLO reports a fan fault on a DL380 Gen10 or when populating the second socket, and ServerDove keeps it in Doha stock alongside its DL380 Gen10 barebones and assembled servers.

Server
DL380 Gen10
Type
Hot-plug fan
Fitting
Tool-less
Height
2U
SKU FAN-HP-DL380-G10
Product typeCooling fan module
CompatibilityHPE ProLiant DL380 Gen10
FeaturesHot-plug, high performance cooling, optimised airflow, tool-less installation
RoleServer thermal management component
TypeOEM HPE replacement fan

The DL380 Gen10 fan bay holds six modules, and HPE's firmware sets the required count from the processor and card configuration: a single processor server runs with four and refuses full performance with the second socket populated until all six are present. Each fan reports its speed to iLO, which flags a failing fan by position; the remaining fans speed up to compensate, which keeps the server safe but noisy until the fan is replaced. Modules are keyed and drop into any bay.

Buyers of ServerDove's DL380 Gen10 barebones, which are supplied with the fans for a single processor, can order the two extra modules from the same stock when fitting the second socket, and owners of the assembled DL380 Gen10 servers can keep a spare on the shelf. Replacing a fan takes under a minute and needs no downtime, which is the point of the hot-plug design.

Installation

Fans are hot-plug, so with the server running and the lid off, lift the failed module out by its tab and press the replacement into the same bay until it seats on its connector; iLO confirms it within seconds. When adding fans for a second processor, fill the two empty positions shown on the label inside the lid. Refit the lid promptly, as the chassis airflow depends on it.

Part numbers and identification

SKUFAN-HP-DL380-G10

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.