HPE ProLiant DL360 Gen9 / Gen10 1U Rack Rail Kit – Pair
Price includes warranty
HPE
مواصفات المنتج
| Type | Rack rail kit |
| Compatible Series | HPE ProLiant DL360 Gen9 / Gen10 |
| Form Factor | 1U |
| Rack Type | Four-post server rack |
| Quantity | Pair (left and right rail assemblies) |
| Cable Management Arm | Not included |
Refurbished · Tested
HPE ProLiant DL360 Gen9 and Gen10 1U rack rail kit, a left and right pair for four-post racks.
This refurbished HPE rail kit is a pair of 1U rack rails, left and right, for installing a ProLiant DL360 Gen9 or DL360 Gen10 in a four-post server rack. The DL360 is HPE's 1U two-socket rack server. On rails it occupies a single rack unit and can be serviced from the front of the cabinet, which matters on a server where drives, memory and fans are reached from the front or through the top cover. Data centre staff and integrators in Qatar buy it to rack a DL360 that arrived without rails, to replace a damaged or missing set, or to move a server off a shelf into a proper rack position. HPE produced more than one rail kit for the DL360 line, and the right one depends on the rail part number and on whether the chassis is the SFF or LFF variant. We hold this kit in Doha under SKU SD-RAIL-DL360-G9-G10. The cable management arm is a separate item.
SD-RAIL-DL360-G9-G10Form factor 1UWill it fit my system?
The kit is listed for the 1U DL360 in its Gen9 and Gen10 generations. Within each generation, the correct rail kit is tied to the drive configuration: SFF chassis take 2.5 inch drives and LFF chassis take 3.5 inch drives.
| Server | Generation | Note |
|---|---|---|
| ProLiant DL360 Gen9 | Gen9 | Fit depends on rail part number and SFF or LFF chassis |
| ProLiant DL360 Gen10 | Gen10 | Fit depends on rail part number and SFF or LFF chassis |
The DL380 is a 2U server and uses its own rail kits, and other ProLiant models have different chassis dimensions, so this kit is not a substitute for them.
Specification
For rack rails, the values that matter are the rack type, the quantity and what comes in the kit, not electrical ratings. One kit mounts one server in one rack unit of a four-post cabinet.
Installation
Check that the depth between the front and rear posts of your rack suits a DL360 before you start, as these rails are designed for four-post racks and not for two-post frames. Identify the left and right assemblies and mount them level, at the same rack unit, on the front and rear posts. With both rails secure, lift the server onto them; a fully loaded DL360 is easier and safer to handle with two people. Without a cable management arm, route and secure the power and network cables at the rear of the rack by other means.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWhich servers is this rail kit for?
It is a 1U rail kit for the HPE ProLiant DL360 Gen9 and DL360 Gen10. Fit within those generations depends on the rail part number and on whether the server is the SFF or LFF chassis variant, so compare the part number of your existing or specified rails with this kit before installing.
Does it matter whether my DL360 is SFF or LFF?
Yes. HPE produced more than one rail kit for the DL360 line, and the correct one is tied to the chassis drive configuration. Check whether your server takes 2.5-inch (SFF) or 3.5-inch (LFF) drives and confirm the matching rail part number before ordering.
Is this one rail or a pair?
It is a pair, made up of a left and a right rail assembly. That is the set needed to mount a single DL360 server in the rack. One kit is required per server.
Is a cable management arm part of this kit?
No. The cable management arm is a separate HPE item and is not part of this rail kit. The server can be installed and used on the rails without one. Cables then need routing and securing at the rear of the rack by other means.
What kind of rack do these rails fit?
They are intended for a four-post server rack, with front and rear mounting posts. They are not designed for two-post telecom or relay racks. Check that the depth between your front and rear posts suits a DL360 before installing.
Can these rails be used with a DL380 or other ProLiant models?
This kit is listed for the 1U DL360 Gen9 and Gen10 only. The DL380 is a 2U server and uses its own rail kits, and other ProLiant models have different chassis dimensions. Use the rail kit specified for the exact server model and generation.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.