Home / خوادم HPE ProLiant DL360 Gen9 / وحدة مروحة قياسية HPE ProLiant DL360 Gen9 Gen10
الانتقال إلى معلومات المنتج
HPE

وحدة مروحة قياسية HPE ProLiant DL360 Gen9 Gen10

Refurbished · Tested P/N: FAN-HP-DL360-G9-G10-STD
السعر الأصلي QAR 90.00
السعر الأصلي سعر التخفيض QAR 90.00
تخفيض نفدت الكمية

Price includes warranty

HPE

Out of stock
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

وحدة مروحة HPE ProLiant DL360 Gen9 Gen10 القياسية هي جزء من الخادم مصمم لأنظمة HPE ProLiant DL360 المتوافقة. إنها خيار استبدال عملي للحفاظ على تدفق الهواء داخل تكوينات الخادم المدعومة.

الحالة: مستعملة، تم اختبارها بالكامل

الضمان: شهر واحد

HPE ProLiant DL360 Gen9 Gen10 standard hot plug fan module Refurbished · Tested
About this fan module

HPE ProLiant DL360 Gen9 and Gen10 standard fan module, the hot-plug replacement cooling fan for the 1U server's fan bay, refurbished.

This is the standard cooling fan module for the HPE ProLiant DL360 Gen9 and DL360 Gen10, the 1U rack servers whose fan bay behind the drives holds a row of these hot-plug modules. It is the part that replaces a failed or noisy fan, and the part that fills the empty positions when a second processor is added to a server that shipped with one. It is refurbished and is the standard type rather than the high performance variant. Buyers in Qatar order it when iLO reports a fan fault or degraded fan on a DL360, or when populating the second socket, and ServerDove keeps it in Doha stock alongside its DL360 Gen9 and Gen10 servers.

Servers
DL360 Gen9, Gen10
Type
Standard fan
Service
Hot-plug
Height
1U
SKU FAN-HP-DL360-G9-G10-STD
Product typeFan module
CompatibilityHPE ProLiant DL360 Gen9, DL360 Gen10
CategoryServer cooling, replacement part

A 1U server depends on its fans more than a 2U server does, because the low chassis leaves no room for large heatsinks and airflow must be forced through the drive cage, the processors and the rear cards in one pass. The DL360's fan row holds seven modules in Gen9 and Gen10, of which a single processor server uses a subset; iLO monitors each fan's speed and raises an alert when one falls below its expected range, which is the signal to replace it. HPE specifies a high performance fan for the hottest processors; this standard module suits all others.

Buyers of ServerDove's DL360 Gen9 and Gen10 barebones and assembled servers can obtain matching fans from the same stock, whether to complete a second socket or to keep a spare. Replacing a fan takes seconds and needs no downtime.

Installation

The fans are hot-plug, so with the server running and the lid removed, lift the failed fan out of its bay by the tab and press the replacement into the same bay until its connector seats. Refit the lid promptly, since the server's airflow depends on it. When adding fans for a second processor, fit them in the positions HPE's label inside the lid shows. iLO confirms the fan is present and running within a few seconds.

Part numbers and identification

SKUFAN-HP-DL360-G9-G10-STD

Condition & testing

  • Full hardware diagnostics and burn-in
  • Memory, storage and power supplies verified
  • Management controller reset, BIOS returned to defaults
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.