Home / Rack Rails & Accessories / HPE ProLiant DL380 Gen9 Gen10 عدة قضبان التثبيت على الرفوف المنزلقة
الانتقال إلى معلومات المنتج
HPE

HPE ProLiant DL380 Gen9 Gen10 عدة قضبان التثبيت على الرفوف المنزلقة

Refurbished · Tested P/N: RAIL-HP-DL380-G9-G10
السعر الأصلي QAR 270.00
السعر الأصلي سعر التخفيض QAR 270.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

HPE

In stock · 2 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
رمز المنتج (SKU) RAIL-HP-DL380-G9-G10
نوع المنتج طقم قضبان للرف
الموديلات المتوافقة HPE ProLiant DL380 Gen9
الموديلات المتوافقة HPE ProLiant DL380 Gen10
عامل شكل الخادم خوادم الرف 2U
Full specification 11 rows
HPE ProLiant DL380 Gen9 Gen10 2U sliding rack rail kit Refurbished · Tested
About this rail kit

HPE ProLiant DL380 Gen9 and Gen10 rack rail kit, the OEM sliding rails, left and right, for a standard 19 inch rack.

This is HPE's sliding rail kit for the ProLiant DL380 Gen9 and DL380 Gen10, the pair of left and right rails that let the 2U server slide out of the rack for service without being unracked. Refurbished servers often arrive without rails, and the DL380 cannot sit in a rack safely without them; this OEM kit is the correct part for both generations. It is refurbished and includes both rails. Buyers in Qatar order this kit whenever a DL380 Gen9 or Gen10 goes into a rack, and ServerDove keeps it in Doha stock so a chassis and its rails can be supplied together.

Servers
DL380 Gen9, Gen10
Rail type
Sliding
Height
2U
Included
Left and right
SKU RAIL-HP-DL380-G9-G10
Product typeRack rail kit
Compatible modelsHPE ProLiant DL380 Gen9, DL380 Gen10
Rack server size2U
Rail typeSliding
InstallationStandard server rack
IncludedLeft and right rails
OEMHPE server rail kit

HPE's rails are tool-less at the rack end: spring loaded pins engage the square holes of a standard 19 inch rack, and the inner rails attach to the server's sides with its own studs. The kit fits racks from about 61 to 91 centimetres deep. Sliding rails allow the server to be pulled fully forward for lid access, which is how memory, processors and risers are serviced in place.

What is included

  • Left sliding rail assembly for the DL380 Gen9 and Gen10
  • Right sliding rail assembly for the DL380 Gen9 and Gen10

Buyers of ServerDove's DL380 Gen9 and Gen10 barebones and assembled servers can order this kit with the chassis so the server is rack ready on arrival. The cable management arm that HPE offers for the DL380 attaches to these rails and is a separate part.

Installation

Separate the inner rail from each outer rail, fit the inner rails to the server's sides on their studs, and mount the outer rails in the rack by pressing their pins into the front and rear posts at the same height. With two people, lift the server so the inner rails enter the outer rails and push it back until it locks. Pull it forward once to confirm the slides run freely and the stops engage.

Part numbers and identification

SKURAIL-HP-DL380-G9-G10

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.