Home / SAS Hard Drives / محرك أقراص ثابتة للمخدمات من فئة المؤسسات IBM سعة 1.2 تيرابايت SAS بسرعة 10 آلاف دورة في الدقيقة 12G
الانتقال إلى معلومات المنتج
IBM

محرك أقراص ثابتة للمخدمات من فئة المؤسسات IBM سعة 1.2 تيرابايت SAS بسرعة 10 آلاف دورة في الدقيقة 12G

Refurbished · Tested P/N: HDD-1.2TB-SAS10K-IBM
السعر الأصلي QAR 190.00
السعر الأصلي سعر التخفيض QAR 190.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

IBM

In stock · 9 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية IBM
الرقم التعريفي للمخزون (SKU) HDD-1.2TB-SAS10K-IBM
السعة 1.2 تيرابايت
عامل الشكل 2.5 بوصة SFF
الواجهة 12 جيجابت/ثانية SAS-3
سرعة الدوران 10 آلاف دورة في الدقيقة
Full specification 11 rows
IBM 01LJ794 1.2TB 10K SAS 2.5 inch hard drive, Seagate ST1200MM0099 Refurbished · Tested
About this drive

IBM 1.2TB 10K SAS 12Gb/s 2.5 inch enterprise HDD, IBM part 01LJ794 with label number 01LJ796, a Seagate ST1200MM0099 drive, Seagate part 1XH200-039.

This is an IBM branded 1.2TB 10,000 rpm SAS 12Gb/s hard drive in the 2.5 inch small form factor, carried in IBM's system as part number 01LJ794, FRU 01LJ787 and label part number 01LJ796. The drive itself is a Seagate ST1200MM0099, Seagate part 1XH200-039, an enterprise mechanical hard drive of the type IBM fitted to its storage systems and servers. It is refurbished and sold as a bare drive. Buyers in Qatar with IBM storage or servers need the IBM part number to match a failed drive so the system accepts the replacement, and ServerDove keeps it in Doha stock for that reason. As a standard Seagate SAS drive it also works in other vendors' servers on any 12Gb/s SAS controller.

Capacity
1.2TB
Speed
10,000 rpm
Interface
SAS 12Gb/s
IBM part
01LJ794
SKU HDD-1.2TB-SAS10K-IBM

Specification

Capacity1.2TB, 1200GB
Rotational speed10,000 rpm
InterfaceSAS 12Gb/s
Form factor2.5 inch SFF
Drive typeEnterprise mechanical hard drive
ManufacturerSeagate

IBM storage systems often format drives with a non-standard sector size, so a drive that has lived in one may need reformatting before another system accepts it; the sector format of an individual drive is read from the drive itself when it is connected. On a standard server controller the drive behaves as any 10K SAS drive, with sequential throughput around 200 megabytes per second.

Installation

In an IBM system, fit the drive to the system's carrier and insert it while running; the system identifies it by part number and begins the rebuild or adds it as a spare. In another server, use that server's 2.5 inch caddy, hot-plug the drive and check the controller sees the full 1.2TB; if it reports an unusual sector size, reformat it through the controller utility before use. Match it with the same model within a RAID set.

Part numbers and identification

SKUHDD-1.2TB-SAS10K-IBM
IBM part number01LJ794
IBM FRU01LJ787
IBM label part number01LJ796
Seagate modelST1200MM0099
Seagate part number1XH200-039

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.