Home / Drive Caddies / علبة محرك أقراص Dell بحجم 2.5 بوصة SFF لطرازات R640 R740 R740xd R940
الانتقال إلى معلومات المنتج
DELL

علبة محرك أقراص Dell بحجم 2.5 بوصة SFF لطرازات R640 R740 R740xd R940

Refurbished · Tested P/N: CADDY-DELL-14G-SFF
السعر الأصلي QAR 60.00
السعر الأصلي سعر التخفيض QAR 60.00
تخفيض نفدت الكمية

Inclusive of VAT · Warranty included

DELL

In stock · 63 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية DELL
رقم المنتج CADDY-DELL-14G-SFF
نوع المنتج حامل القرص الصلب
عامل الشكل 2.5 بوصة SFF
دعم الأقراص SAS / SATA / SSD
التوافق سلسلة Dell PowerEdge R640, R740, R740xd, R940
Full specification 9 rows
Dell 14G 2.5 inch SFF hot plug drive caddy for PowerEdge R640 R740 R740xd R940 Refurbished · Tested
About this drive caddy

Dell 2.5 inch SFF hot-plug drive caddy, SKU CADDY-DELL-14G-SFF, for mounting SAS and SATA drives in 14th generation PowerEdge servers.

This is a 2.5 inch small form factor (SFF) hot-plug drive caddy for Dell's 14th generation (14G) PowerEdge servers, the Xeon Scalable platform Dell introduced in 2017. It fits the front 2.5 inch bays of the PowerEdge R640, R740, R740xd and R940, and holds one 2.5 inch SAS or SATA hard drive or SSD. PowerEdge servers do not accept bare drives. Every populated bay needs a carrier that lines the drive up with the backplane connector and latches it in place. Buyers are usually system administrators, resellers and data centre teams adding drives to bays fitted with blanks, replacing a cracked tray, or keeping spare carriers ready so a replacement drive is mounted before the failed one is pulled. Refurbished 14G servers often arrive with blanking panels in unused slots or with a tray damaged in transport, a common situation for IT teams in Doha and across Qatar rebuilding hosts for redeployment. One caddy covers all four models, which keeps spares simple in a mixed 14G estate.

Platform
PowerEdge 14G
Drive types
SAS and SATA
Hot-plug
Yes
Mounting
Front drive bays
SKU CADDY-DELL-14G-SFFForm factor 2.5 inch SFF

All four servers belong to the 14G family and share the same SFF carrier design, so the drive seats against the backplane and the bay latches as the chassis expects. 13th generation systems such as the R630 and R730 use carriers designed around their own chassis, so match the caddy to the server generation.

ServerGenerationNote
PowerEdge R64014G1U rack, front SFF bays
PowerEdge R74014G2U rack, front SFF bays
PowerEdge R740xd14G2U rack, SFF bay configurations
PowerEdge R94014G3U four-socket rack, front SFF bays

The caddy does not change drive support. Whether a given drive works depends on the RAID controller and server firmware, not on the tray.

Check the BIOS or firmware version before fitting, as noted above, or let us fit and update it for you.

Specification

The caddy is sized for 2.5 inch drives only. A 3.5 inch drive will not mount in it, and servers built with 3.5 inch LFF bays need the 3.5 inch 14G carrier instead, so check the bay size on the front panel before ordering.

Download spec sheet (PDF)
ManufacturerDell
TypeHot-plug drive caddy (tray)
Form factor2.5 inch SFF
PlatformDell PowerEdge 14th generation (14G)
Supported drives2.5 inch SAS HDD, SATA HDD, SAS and SATA SSD
Drives per caddy1
Hot swapYes
Mounting locationFront 2.5 inch drive bays

Installation

Place the drive in the caddy with its connector facing the rear and secure it with screws through the carrier mounting holes. Open the release handle, slide the caddy into the bay until it meets the backplane, then close the handle until it latches. The tray can be inserted or removed with the server running, but only pull a drive that belongs to a redundant RAID set or has first been taken offline in the controller or operating system. After fitting a replacement in a degraded array, check iDRAC or the PERC controller utility to see that the rebuild has started. Keep blanks in any bays left empty so front to back airflow is maintained.

Part numbers and identification

SKUCADDY-DELL-14G-SFF

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.