Home / Drive Caddies / Dell 2.5" to 3.5" SAS SATA HDD SSD Adapter Caddy 9W8C4 Y004G F238F
الانتقال إلى معلومات المنتج
DELL

Dell 2.5" to 3.5" SAS SATA HDD SSD Adapter Caddy 9W8C4 Y004G F238F

Refurbished · Tested P/N: CADDY-DELL-25TO35-9W8C4
السعر الأصلي QAR 65.00
السعر الأصلي سعر التخفيض QAR 65.00
تخفيض نفدت الكمية

Price includes warranty

DELL

In stock · 10 available
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

Drive Adapter Size2.5" to 3.5"
Supported Drive TypesSAS and SATA HDD / SSD
Dell Part Number9W8C4
Dell Part NumberY004G
Tray Part NumberF238F
Drive Bay Compatibility3.5" LFF Drive Bays
Full specification 13 rows
Dell 9W8C4 Y004G 2.5 to 3.5 inch drive adapter with F238F LFF caddy Refurbished · Tested
About this adapter caddy

Dell 2.5 to 3.5 inch adapter caddy, parts 9W8C4 and Y004G with tray F238F, mounting a SAS or SATA SSD in an LFF bay.

This Dell adapter, part numbers 9W8C4 and Y004G, together with the F238F tray, lets a 2.5 inch SAS or SATA drive or SSD sit in a 3.5 inch hot-plug bay of a PowerEdge server. The adapter holds the small drive centred in the tray with its connector aligned to the backplane, so the server treats it like any LFF drive. It is the usual way to put an SSD boot mirror into a server whose bays are all 3.5 inch. It is refurbished and supplied without a drive. Buyers in Qatar use it in T440, R740 and similar LFF servers to combine a pair of SSDs for the operating system with large hard drives for data in the same cage, and ServerDove keeps it in Doha stock alongside its LFF servers and SSDs.

Converts
2.5 to 3.5 inch
Adapter parts
9W8C4, Y004G
Tray part
F238F
Drives
SAS, SATA HDD, SSD
SKU CADDY-DELL-25TO35-9W8C4

Specification

Drive adapter size2.5 inch to 3.5 inch
Supported drivesSAS and SATA hard drives and SSDs
Bay compatibility3.5 inch LFF drive bays
Drive installation2.5 inch SFF drive
CompatibilityDell PowerEdge servers
Carrier typeHot-plug drive carrier

The F238F tray is Dell's 3.5 inch carrier of the 11th to 13th generation, so this adapter set suits servers of those generations; 14th generation LFF servers use a different tray with its own adapter. SAS and SATA drives both work, since the adapter is purely mechanical and the backplane connection passes straight through. Because the small drive sits centred, the tray's light pipe still shows drive activity and fault status.

Installation

Fasten the 2.5 inch drive to the adapter with its four screws, then fit the adapter into the F238F tray so the drive's connector sits where a 3.5 inch drive's would, and secure it. Remove the bay blank, slide the tray in with the lever open until it stops, close the lever, and wait for the PERC to detect the drive. For an SSD boot mirror, fit two and create the virtual disk before installing the operating system.

Part numbers and identification

SKUCADDY-DELL-25TO35-9W8C4
Dell adapter part numbers9W8C4, Y004G
Tray part numberF238F

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.