Home / اللوحات الخلفية للخوادم / لوحة خلفية ساس ساتا من HPE بـ 8 فتحات صغيرة 780428-001
الانتقال إلى معلومات المنتج
HPE

لوحة خلفية ساس ساتا من HPE بـ 8 فتحات صغيرة 780428-001

Refurbished · Tested P/N: BP-HP-8SFF-780428-001
السعر الأصلي QAR 375.00
السعر الأصلي سعر التخفيض QAR 375.00
تخفيض نفدت الكمية

Price includes warranty

HPE

Out of stock
اسأل عبر واتساب
مُختبر بالكامل يخضع لاختبار تشغيل قبل الشحن
الضمان مشمول يشمل كل وحدة نبيعها
التوصيل خلال يوم واحد في قطر مجانًا للطلبات فوق 300 ريال
دعم فني متخصص مساعدة في التهيئة عبر واتساب

مواصفات المنتج

العلامة التجارية HPE
رقم التعريف BP-HP-8SFF-780428-001
رقم قطعة HPE 780428-001
فتحات الأقراص 8-Bay Hot Plug SFF
دعم محركات الأقراص محركات أقراص 2.5 بوصة SAS / SATA
واجهة SAS 12 جيجابت/ثانية
Full specification 10 rows
HPE 780428-001 8 bay SFF SAS SATA hot plug drive backplane board Refurbished · Tested
About this backplane

HPE eight bay SFF SAS and SATA backplane board 780428-001, the hot-plug backplane behind the 8SFF cage of Gen9 and Gen10 servers.

HPE part 780428-001 is the eight bay small form factor drive backplane that mounts behind the 8SFF drive cage of ProLiant Gen9 and Gen10 servers, providing hot-plug connections for eight 2.5 inch SAS drives at 12Gb/s or SATA drives at 6Gb/s. It is the board the drives plug into and the controller cables connect to, and it is the part needed when adding a second cage to a 2U server or replacing a backplane with failed bays. It is refurbished. Buyers in Qatar order 780428-001 to expand a 2U Gen9 or Gen10 server from eight to sixteen bays with a cage and cables, or to repair a chassis whose backplane no longer recognises drives, and ServerDove keeps it in Doha stock alongside its 2U chassis.

HPE part
780428-001
Bays
8 x 2.5 inch
SAS
12Gb/s
SATA
6Gb/s
SKU BP-HP-8SFF-780428-001

Specification

Drive bays8, hot-plug SFF
Drive support2.5 inch SAS and SATA
SAS interface12Gb/s
SATA interface6Gb/s
MountingBehind the 8SFF drive cage
CompatibilityHPE Gen9 and Gen10 servers

The backplane carries two Mini SAS ports, each serving four bays, a power connector from the chassis harness and a signal connector that drives the SmartDrive carriers' status lights; it has no expander, so all eight bays connect straight through to the controller at full speed. Adding a second cage to a 2U ProLiant needs this board, the cage itself, a power and signal cable and a second pair of SAS cables to the controller, or an expander card if the controller has only two ports.

The same board serves both generations because HPE kept the 8SFF cage and SmartDrive carrier unchanged from Gen9 to Gen10, which is also why drives and carriers move freely between them.

Installation

Power the server down and unplug it, remove the lid, and pull the drives from the cage after labelling their bay positions. Remove the cage, unscrew the old backplane from its rear, fit 780428-001 in its place and reconnect the power, signal and SAS cables, then refit the cage and the drives in their original bays. On boot the controller should list all eight bays; a missing group of four points to an unseated SAS cable.

Part numbers and identification

SKUBP-HP-8SFF-780428-001
HPE part number780428-001

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.