خوادم Dell PowerEdge R740

About the Dell PowerEdge R740

خوادم راك Dell PowerEdge R740 مجددة في قطر.

Refurbished Dell PowerEdge R740 2U rack servers, tested and stocked in Doha, with dual Intel Xeon Scalable processors, up to 24 DDR4 DIMM slots and 8 or 16 front drive bays, delivered across Qatar within a day.

The R740 is the 2U counterpart to the R640 in Dell's 14th-generation PowerEdge line, released in 2017. It carries the same dual Intel Xeon Scalable platform and 24 memory slots, but the taller chassis buys three things the 1U cannot offer: 3.5-inch drive bays, up to eight PCIe slots, and room for double-width GPUs. That makes it the default choice where a server has to hold a lot of storage or accelerators as well as compute: file and backup servers, virtualisation hosts with local datastores, database servers on 3.5-inch nearline SAS, and video or analytics workloads on GPUs. Refurbished, it delivers the same platform at a fraction of the price of a current-generation R750, and every part of it is still readily available.

Dell PowerEdge R740 Servers
Form factor
2U rack
Sockets
2 x LGA3647
Memory
24 x DDR4
Drive bays
8 or 16
Management
iDRAC9

Chassis options

The R740 was built in three front-bay configurations. As with the R640, the bay layout is fixed to the chassis and backplane, so it cannot be changed after purchase without replacing both. Rear drive bays and the 24-bay front are R740xd features, not R740.

Chassis Front bays Drive types Typical use
8 x 3.5" 8 SAS, SATA Bulk capacity on nearline SAS: file servers, backup targets, surveillance storage
8 x 2.5" 8 SAS, SATA, SSD General virtualisation where 2U is chosen for the PCIe slots rather than the drives
16 x 2.5" 16 SAS, SATA, SSD, NVMe (up to 8 NVMe on the hybrid backplane) Databases, VDI, mixed flash and disk tiers
Dell PowerEdge R740 8 x 3.5 inch LFF chassis, front view
8 x 3.5" chassis. The layout to choose for large SATA or nearline SAS drives.
Dell PowerEdge R740 16 x 2.5 inch SFF chassis, front view
16 x 2.5" chassis. Twice the spindles of the 8-bay, and the only R740 layout that takes NVMe.

All three variants take the optional BOSS card with two M.2 SATA SSDs for a mirrored boot volume, keeping the front bays free for data.

Processors

The R740 accepts first-generation (Skylake-SP, 2017) and second-generation (Cascade Lake, 2019) Intel Xeon Scalable processors in two LGA3647 sockets, and unlike the R640 it supports the full 205 W thermal envelope in every chassis, so the top Platinum parts are an option. Both CPUs in a system must be identical. The lists below cover the SKUs most commonly found in refurbished R740 units.

Intel Xeon Gold 6138 processor
The Xeon Gold 6138: 20 cores at 125 W, the most common CPU in refurbished R740 and R640 builds.

Second-generation Xeon Scalable (Cascade Lake)

Processor Cores Base clock TDP Memory speed
Xeon Silver 4208 8 2.1 GHz 85 W 2400 MT/s
Xeon Silver 4210 10 2.2 GHz 85 W 2400 MT/s
Xeon Silver 4210R 10 2.4 GHz 100 W 2400 MT/s
Xeon Silver 4214 12 2.2 GHz 85 W 2400 MT/s
Xeon Silver 4214R 12 2.4 GHz 100 W 2400 MT/s
Xeon Silver 4216 16 2.1 GHz 100 W 2400 MT/s
Xeon Gold 5218 16 2.3 GHz 125 W 2666 MT/s
Xeon Gold 5218R 20 2.1 GHz 125 W 2666 MT/s
Xeon Gold 5220 18 2.2 GHz 125 W 2666 MT/s
Xeon Gold 6226 12 2.7 GHz 125 W 2933 MT/s
Xeon Gold 6230 20 2.1 GHz 125 W 2933 MT/s
Xeon Gold 6238 22 2.1 GHz 140 W 2933 MT/s
Xeon Gold 6240 18 2.6 GHz 150 W 2933 MT/s
Xeon Gold 6242 16 2.8 GHz 150 W 2933 MT/s
Xeon Gold 6248 20 2.5 GHz 150 W 2933 MT/s
Xeon Gold 6252 24 2.1 GHz 150 W 2933 MT/s
Xeon Platinum 8260 24 2.4 GHz 165 W 2933 MT/s
Xeon Platinum 8268 24 2.9 GHz 205 W 2933 MT/s
Xeon Platinum 8280 28 2.7 GHz 205 W 2933 MT/s

First-generation Xeon Scalable (Skylake-SP)

Processor Cores Base clock TDP Memory speed
Xeon Silver 4110 8 2.1 GHz 85 W 2400 MT/s
Xeon Silver 4114 10 2.2 GHz 85 W 2400 MT/s
Xeon Silver 4116 12 2.1 GHz 85 W 2400 MT/s
Xeon Gold 5118 12 2.3 GHz 105 W 2400 MT/s
Xeon Gold 5120 14 2.2 GHz 105 W 2400 MT/s
Xeon Gold 6126 12 2.6 GHz 125 W 2666 MT/s
Xeon Gold 6130 16 2.1 GHz 125 W 2666 MT/s
Xeon Gold 6132 14 2.6 GHz 140 W 2666 MT/s
Xeon Gold 6138 20 2.0 GHz 125 W 2666 MT/s
Xeon Gold 6140 18 2.3 GHz 140 W 2666 MT/s
Xeon Gold 6142 16 2.6 GHz 150 W 2666 MT/s
Xeon Gold 6148 20 2.4 GHz 150 W 2666 MT/s
Xeon Gold 6152 22 2.1 GHz 140 W 2666 MT/s
Xeon Platinum 8160 24 2.1 GHz 150 W 2666 MT/s
Xeon Platinum 8168 24 2.7 GHz 205 W 2666 MT/s
Xeon Platinum 8180 28 2.5 GHz 205 W 2666 MT/s

Silver and Gold 5xxx processors cap memory at 2400 or 2666 MT/s regardless of the DIMMs fitted. If memory bandwidth matters to your workload, a Gold 6xxx or Platinum with second-generation silicon is the difference between 2400 and 2933 MT/s on the same board.

Memory

Twenty-four DDR4 DIMM slots, twelve per processor across six channels. Registered (RDIMM) and load-reduced (LRDIMM) modules are supported; they cannot be mixed in the same system. With one CPU installed, only the twelve slots on that side are usable.

Module Capacities Maximum system memory
RDIMM 8 GB, 16 GB, 32 GB, 64 GB 1.5 TB with 24 x 64 GB
LRDIMM 64 GB, 128 GB 3 TB with 24 x 128 GB
Intel Optane DC Persistent Memory (second-gen CPUs only) 128 GB, 256 GB, 512 GB Up to 12 modules in mixed configurations

For best performance populate all six channels per CPU in matched sets: 6, 12 or 24 DIMMs in total for a dual-CPU system. A single DIMM per CPU works but runs at a fraction of the available bandwidth. Memory runs at the lower of the DIMM rating and the CPU limit, so 2933 MT/s modules on a Silver 4214 run at 2400 MT/s.

Samsung 32GB DDR4-2933 ECC RDIMM
32 GB DDR4-2933 RDIMMs: the usual building block for 192 GB and 384 GB configurations.

Storage and RAID

Drive support depends on the backplane fitted at the factory. All backplanes are hot-plug. The controller options are:

Controller Type Cache RAID levels Notes
PERC H330 Hardware RAID None 0, 1, 5, 10, 50 Entry level; no write-back cache, so write-heavy RAID 5 is slow
PERC H730P Hardware RAID 2 GB NV 0, 1, 5, 6, 10, 50, 60 The common choice for virtualisation and database hosts
PERC H740P Hardware RAID 8 GB NV 0, 1, 5, 6, 10, 50, 60 Highest cache; best for large SSD arrays
HBA330 Pass-through HBA None None (JBOD) For software-defined storage: vSAN, Ceph, ZFS, Storage Spaces
PERC H840 External RAID 8 GB NV 0, 1, 5, 6, 10, 50, 60 PCIe card for external MD14xx disk shelves
BOSS-S1 M.2 boot None 1 Two M.2 SATA SSDs mirrored for the operating system

Supported drive types are 12 Gb/s SAS and 6 Gb/s SATA in both hard disk and SSD form, plus U.2 NVMe on the 16-bay hybrid backplane. Drives need the correct Dell 14th-generation caddy: the 2.5" and 3.5" carriers are not interchangeable with 11th or 12th-generation trays, though they are the same parts used by the R640 and R940.

Dell 14th generation 2.5 inch drive caddy
The 14th-generation 2.5" caddy, shared with the R640 and R940.
Dell PERC H740P RAID controller
PERC H740P: 8 GB of non-volatile cache and 12 Gb/s SAS.

Networking and expansion

Onboard networking is provided by a Network Daughter Card (NDC) that slots into a dedicated connector rather than a PCIe slot. Common options:

  • Broadcom 5720 quad-port 1 GbE (the base configuration)
  • Intel X550 or Broadcom 57416 dual-port 10 GbE BASE-T plus dual-port 1 GbE
  • Intel X710 quad-port 10 GbE SFP+
  • Mellanox ConnectX-4 Lx dual-port 25 GbE SFP28

Beyond the NDC, the R740 offers up to eight PCIe 3.0 slots across three risers with two processors installed, in a mix of full-height and low-profile. That is enough for a pair of Fibre Channel HBAs, a 25 GbE adapter and a RAID card at the same time. With the GPU-enabled riser configuration the chassis takes up to three double-width 300 W accelerators such as the NVIDIA Tesla V100 or P40, which is the main reason to choose an R740 over an R640 for analytics, rendering or inference workloads.

Power supplies

Two hot-plug redundant power supply bays, configured 1+1. Options are 495 W, 750 W, 1100 W, 1600 W, 2000 W and 2400 W, all 80 PLUS Platinum or Titanium. A dual-CPU system with a full memory load and sixteen drives sits comfortably within a 1100 W envelope; the 1600 W and above units are for GPU configurations. Both supplies in a system should be the same rating.

Management

Every R740 includes iDRAC9 with a dedicated management port. The Express licence covers remote power, health monitoring and basic alerts; the Enterprise licence adds the virtual console, virtual media, remote firmware updates through the Lifecycle Controller and the full Redfish API, which is what most buyers actually want for a server in a rack they do not visit. Enterprise licences can be added to any unit. The R740 also supports OpenManage Enterprise for fleet management.

Physical specification

Form factor 2U rack, 2 socket
Height 86.8 mm (2U)
Width 434 mm chassis, 482 mm with rack ears
Depth Approximately 715 mm without bezel [VERIFY against the units in stock]
Weight Up to 28.6 kg fully configured
Rails Dell ReadyRails II sliding or static; B6 kit for the R740 [VERIFY the kit you supply]
Operating temperature 10 to 35 °C continuous, with Fresh Air 2.0 support to 45 °C in qualified configurations

Supported operating systems

The R740 is on the certified hardware lists for:

  • Windows Server 2016, 2019 and 2022
  • Red Hat Enterprise Linux 7, 8 and 9
  • SUSE Linux Enterprise Server 12 and 15
  • Ubuntu Server 18.04, 20.04 and 22.04 LTS
  • VMware ESXi 6.5, 6.7, 7.0 and 8.0
  • Citrix Hypervisor 8

Windows Server 2025 and ESXi 8 are outside Dell's support matrix for the R740 but run on it. Confirm your hypervisor's hardware compatibility list before buying if you need vendor support.

Buying a refurbished R740 from ServerDove

Every unit we sell has been through full hardware diagnostics and a burn-in run: memory tested across every installed DIMM, controller and drive health verified, both power supplies load-tested, and the iDRAC reset and confirmed reachable. BIOS is returned to defaults and the firmware brought to a stable release. Units carry a six-month warranty and are held in Doha, so a replacement part is a short drive away rather than a shipment from overseas.

Because the R740 is past its manufacturer support window, we are also the practical route to keeping one in service: we stock the caddies, PERC cards, NDCs, power supplies and rail kits that fit it, and our hardware support plans cover units bought elsewhere as well as our own.

If you need a specific configuration that is not listed, tell us the CPU, memory and drive layout you want and we will quote a build from stock. Custom configurations are usually ready within two working days.

من المدونة

أدلة الشراء والمقارنات

عرض كل المقالات