Couldn't load pickup availability
DELL DC 1.92TB SATA 2.5" Enterprise SSD
Price includes warranty
DELL
Product Specification
| Capacity | 1.92TB |
| Drive Type | Solid State Drive (SSD) |
| Storage Medium | NAND flash |
| Class | Enterprise / Data Centre |
| Interface | SATA |
| Interface Speed | 6Gb/s |
Refurbished · Tested
Dell DC 1.92TB SATA 6Gb/s 2.5 inch enterprise SSD for hot-plug drive bays in Dell PowerEdge and other servers.
This is a refurbished Dell data centre (DC) solid state drive with 1.92TB of NAND flash, a SATA 6Gb/s interface and the 2.5 inch small form factor, sold under our SKU SSD-1.92TB-SATA-DELL. It is intended for Dell PowerEdge servers and other enterprise platforms with 2.5 inch SATA or SAS/SATA bays. As a Dell-branded drive, it keeps a PowerEdge fleet consistent for spares and inventory. IT teams in Doha and across Qatar fit it to replace ageing SFF hard drives in servers that remain in service, to add a flash tier to a mixed array, or to build read-heavy all-flash volumes for virtualisation hosts, databases and mirrored boot volumes. The 1.92TB capacity suits a single-drive operating system install or one member of a larger RAID set.
SSD-1.92TB-SATA-DELLForm factor 2.5 inch SFFSpecification
The interface is the value that decides where this drive fits. SATA drives work on SATA host controllers, on RAID controllers that support SATA devices, and on SAS controllers and backplanes, which accept SATA drives by design. They do not work in NVMe-only bays. Capacity is quoted in decimal units, so an operating system reports roughly 1.74TiB before formatting.
With no moving parts, the drive gives far quicker random access and lower latency than a spinning disk. It also draws less power and produces less heat and noise, which helps in dense racks.
Installation
A hot-swap bay needs a carrier matched to the server. Dell tray designs differ between PowerEdge generations, so check the tray type of your chassis before fitting. Mount the drive in the carrier with the carrier screws, then slide it into the bay until the handle closes. In a server with a hot-plug backplane and a supporting controller, the drive can be inserted or removed while the system runs. On a cabled bay without a backplane, shut the server down first. The drive fills a 2.5 inch bay; a 3.5 inch bay needs an adapter or a carrier that accepts 2.5 inch drives.
When this drive replaces a failed array member, use it in a set of the same capacity and type, and let the controller finish the rebuild before you remove any other drive. Most RAID controllers, including Dell PERC, do not allow SSDs and hard drives in the same virtual disk, so build a separate flash volume instead. Usable space depends on the RAID level: two drives in RAID 1 give about 1.92TB, four in RAID 5 about 5.76TB, and four in RAID 10 about 3.84TB.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWhat interface does the Dell DC 1.92TB SSD use?
The drive uses a SATA interface running at 6Gb/s. It connects to SATA host controllers, to RAID controllers that support SATA devices, and to SAS controllers and backplanes, since the SAS standard accepts SATA drives. It is not an NVMe or SAS drive, so make sure your server's drive bays and controller support SATA devices before ordering.
Will this SSD work in a Dell PowerEdge server?
This is a Dell data centre SSD used in PowerEdge servers with 2.5-inch SATA or SAS/SATA drive bays. To install it in a hot-swap bay, you will need the correct drive carrier for your server generation, because tray designs differ between PowerEdge generations. Check your model's drive bay type and carrier before purchasing to ensure a straightforward installation.
Does the drive come with a caddy or tray?
This listing describes the 1.92TB SATA SSD itself and does not specify a drive carrier. Hot-swap bays in PowerEdge and other servers require a carrier matched to the chassis generation. If you need one, source the correct tray for your server model separately, or contact us so we can help identify the right part.
Can I use this SSD in a RAID array?
Yes. The drive can serve as a member disk in arrays built on RAID controllers that support SATA devices, including Dell PERC controllers that handle SATA drives. Common configurations include RAID 1 mirrors for boot volumes and RAID 5, 6 or 10 sets for data storage. For best results, use drives of matching capacity and type within the same array.
Is this drive hot-swappable?
The drive is hot-plug capable. When it is fitted in a suitable carrier and installed in a server with a hot-swap backplane and supporting controller, it can be inserted or removed while the system is running. This allows failed array members to be replaced or capacity to be added without scheduling downtime, depending on your RAID configuration and controller settings.
What size is the drive physically?
The SSD uses the 2.5-inch small form factor (SFF) standard, which matches the SFF drive bays found in many rack and tower servers. It will not fill a 3.5-inch bay on its own; using it in a 3.5-inch slot requires a suitable adapter or a carrier that supports 2.5-inch drives.
How much usable storage does a 1.92TB SSD provide?
The drive is rated at 1.92TB using the decimal measurement drive manufacturers use. Operating systems usually report capacity in binary units, so a 1.92TB drive typically appears as roughly 1.74TiB before formatting. Usable space in a RAID array also depends on the RAID level, since mirroring and parity reserve part of the total capacity.
Is this SSD a good replacement for SATA hard drives in a server?
For many workloads it is a strong upgrade. Because it uses the same SATA interface and 2.5-inch form factor as SFF hard drives, it can typically go into the same bays and carriers. You gain much faster random access, lower latency, lower power draw and silent operation, with the largest improvements in virtualisation, databases and operating system responsiveness.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.