Home / Parts & Accessories / Dell 1100W Server Power Supply L1100E-S1
Skip to product information
DELL

Dell 1100W Server Power Supply L1100E-S1

Refurbished · Tested P/N: PSU-DELL-1100W-L1100E-S1
Regular price QAR 285.00
Regular price Sale price QAR 285.00
Sale Sold out

Inclusive of VAT · Warranty included

DELL

Out of stock
Ask on WhatsApp
Fully tested Burn-in tested before dispatch
Warranty included Covered on every unit we sell
1-day delivery in Qatar Free over QAR 300
Expert support Configuration help on WhatsApp

Product Specification

Power1100W
Full specification 5 rows
Dell L1100E-S1 1100W hot plug server power supply Refurbished · Tested
About this power supply

Dell 1100W server power supply L1100E-S1, the high output hot-plug PSU for PowerEdge servers with high wattage processors, many drives or GPUs, refurbished.

The L1100E-S1 is Dell's 1100W hot-plug power supply for 13th and 14th generation PowerEdge servers, the rating above the 750W unit and the one Dell specifies when a server carries two high wattage processors, a full complement of drives or a graphics card. It shares the same bay and connector as the 750W supply, so a server can be moved to the higher rating by swapping both units. It is refurbished. Buyers in Qatar fit L1100E-S1 to a 2U server being loaded with 150W or hotter processors and sixteen drives, to a GPU host, or to replace a failed 1100W unit like for like. ServerDove keeps it in Doha stock alongside its R730 and R740 chassis.

Output
1100W
Model
L1100E-S1
Type
Hot-plug
Design
Redundant pair
SKU PSU-DELL-1100W-L1100E-S1

Specification

Power output1100W
Product typeServer power supply
BrandDell

Eleven hundred watts is the rating a 2U PowerEdge needs for two 150W processors, 24 memory modules, sixteen drives and a GPU with margin; a 750W unit in that configuration runs near its limit and Dell's firmware may throttle the server. Both supplies in a redundant pair must be the same rating. The unit needs a 200 to 240V supply to deliver its full output, which is the standard mains in Qatar, and it runs at a reduced rating on 100 to 120V.

Dell offered the 1100W unit across its 13th and 14th generation 2U rack and tower servers as an option above the 750W supply, and the two share the same bay, so it is the part to reach for when a server's load has grown beyond what it was ordered with. iDRAC reports each supply's input power and load, which is the simplest way to see whether a server is running close to the 750W limit before deciding to move up.

Installation

With a healthy second supply fitted, replace a unit while the server runs: disconnect its cord, press the release tab, withdraw it, push the L1100E-S1 in until it latches and reconnect the cord; the LED turns green and iDRAC reports both supplies. When upgrading from 750W, replace both units, one at a time, so the pair matches. Shut down first on a single supply server. A C13 cord rated for the load is required and not included.

Part numbers and identification

SKUPSU-DELL-1100W-L1100E-S1
ModelL1100E-S1

Condition & testing

  • Full hardware diagnostics and burn-in
  • Memory, storage and power supplies verified
  • Management controller reset, BIOS returned to defaults
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.