Home / 2.5-Inch Hard Drives / Dell 2.4TB 10K SAS 12Gb/s 2.5" Enterprise HDD 0RWR8F
Skip to product information
DELL

Dell 2.4TB 10K SAS 12Gb/s 2.5" Enterprise HDD 0RWR8F

Refurbished Β· Tested P/N: HDD-DELL-2.4TB-10K-SAS-RWR8F
Regular price QAR 420.00
Regular price Sale price QAR 420.00
Sale Sold out

Price includes warranty

DELL

In stock Β· 4 available
Ask on WhatsApp
Fully tested Burn-in tested before dispatch
Warranty included Covered on every unit we sell
1-day delivery in Qatar Free over QAR 300
Expert support Configuration help on WhatsApp

Product Specification

Capacity2.4TB
Form Factor2.5" SFF
Interface12Gb/s SAS
Spindle Speed10K RPM
Dell Part Number0RWR8F
CompatibilityDell PowerEdge Servers
Full specification 10 rows
Dell 2.4TB 10K 12Gb/s SAS 2.5 inch enterprise hard drive 0RWR8F Refurbished Β· Tested
About this drive

Dell 2.4TB 10K SAS 12Gb/s 2.5 inch enterprise hard drive, Dell part 0RWR8F, a hot-plug performance drive for PowerEdge servers, refurbished.

Dell part 0RWR8F is a 2.4TB 10,000 rpm SAS hard drive on a 12Gb/s interface in the 2.5 inch small form factor, the largest capacity Dell offers at 10K and the standard performance drive of 14th generation PowerEdge servers. It is hot-pluggable in PowerEdge SFF bays and recognised by PERC controllers as a Dell drive, keeping iDRAC's monitoring and predictive failure alerts active. It is refurbished and sold bare. Buyers in Qatar fit 0RWR8F to R640, R740 and T440 class servers for virtual machine datastores and file storage, eight of them in RAID 10 giving nearly 10TB of 10K storage, and use it to match Dell drives in an existing array. ServerDove keeps it in Doha stock.

Capacity
2.4TB
Speed
10K rpm
Interface
12Gb/s SAS
Dell part
0RWR8F
SKU HDD-DELL-2.4TB-10K-SAS-RWR8FForm factor 2.5 inch SFF

Specification

Capacity2.4TB
Form factor2.5 inch SFF
Interface12Gb/s SAS
Spindle speed10K rpm
CompatibilityDell PowerEdge servers
Hot-plug supportYes

A 2.4TB 10K drive uses 4K physical sectors with 512 byte emulation and delivers over 200 megabytes per second sequentially, with a rebuild time of several hours, which makes RAID 6 or RAID 10 with a spare the right protection for a full set. Dell certification means the drive's firmware is managed by Dell's update tools alongside the server's own, and the PERC will not flag it as uncertified.

Dell sourced its 2.4TB 10K drives from more than one manufacturer under the same class, so two drives with different Dell part numbers can share an array; matching the part number is preferable where possible because identical firmware and geometry make the array's behaviour predictable. In iDRAC the drive reports its temperature and predictive failure status, and a drive flagged as failing should be replaced before it fails outright.

Installation

Fit the drive into a Dell 14th generation 2.5 inch caddy, not included, and hot-plug it; the PERC recognises the Dell part and rebuilds a degraded virtual disk automatically, or the drive is assigned as a spare or a new member in iDRAC. Match part numbers across an array where possible. A rebuild of a 2.4TB member should be left to complete under light load.

Part numbers and identification

SKUHDD-DELL-2.4TB-10K-SAS-RWR8F
Dell part number0RWR8F

Condition & testing

  • Tested in a compatible system
  • Verified against the listed part number and specification
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.