Couldn't load pickup availability
Dell Broadcom 57416 2x10Gb RJ45 5720 2x1Gb RJ45 Quad Port NIC NP9WY
Price includes warranty
DELL
Product Specification
| Dell Part Number | NP9WY |
| Network Interface | RJ45 Copper Network Interface |
| 10Gb Ports | 2x RJ45 Ethernet Ports |
| 1Gb Ports | 2x RJ45 Ethernet Ports |
| 10Gb Controller | Broadcom 57416 Dual 10Gb Controller |
| 1Gb Controller | Broadcom 5720 Dual 1Gb Controller |
Refurbished · Tested
Dell quad port network card NP9WY, Broadcom 57416 dual 10Gb and 5720 dual 1Gb RJ45 ports for PowerEdge R640 and R740.
Dell part NP9WY is a four port copper network card for 14th generation PowerEdge servers, combining a Broadcom 57416 controller with two 10Gb RJ45 ports and a Broadcom 5720 controller with two 1Gb RJ45 ports on one adapter. Dell fitted it as the network daughter card of the R640, R740 and R740xd, giving a server 10GbE over ordinary copper cabling plus two Gigabit ports for management or lower speed networks. It is refurbished. Buyers in Qatar fit NP9WY to move a 14th generation server to 10GbE without fibre or transceivers, using the existing Cat6a cabling to a 10Gb copper switch, and ServerDove keeps it in Doha stock alongside its R640 and R740 servers.
NIC-DELL-NP9WY-2X10G-2X1GWill it fit my system?
| Server | Generation | Note |
|---|---|---|
| Dell PowerEdge R640 | 14th generation, 1U | Network daughter card slot |
| Dell PowerEdge R740 | 14th generation, 2U | Network daughter card slot |
| Dell PowerEdge R740xd | 14th generation, 2U | Network daughter card slot |
Specification
The card is Dell's network daughter card form, which mounts in the dedicated slot at the rear of 14th generation rack servers rather than in a PCIe slot, so it adds four ports without using any expansion slot. The 10Gb ports negotiate down to 1Gb on older switches, and the Broadcom controllers are supported by Windows Server, Linux and VMware with drivers included in Dell's update packages.
Installation
Power the server down and unplug it, remove the lid and locate the network daughter card slot at the rear left. Release the existing card's retaining screws, lift it out, seat NP9WY on the connector and fasten it. Boot, update the card's firmware through iDRAC or Dell's update tools, and configure the ports; the 10Gb ports need Cat6a cabling for full speed over the usual office distances.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWhat type of network ports does the Dell NP9WY provide?
It includes two 10Gb RJ45 Ethernet ports and two 1Gb RJ45 Ethernet ports.
Which Dell servers are compatible with this NIC?
It is compatible with Dell PowerEdge 14G servers, including the R640, R740, and R740xd.
Does this adapter use copper or fiber connections?
This network daughter card uses RJ45 copper network interfaces.
What controllers are used on the NP9WY?
It uses a Broadcom 57416 dual 10Gb controller and a Broadcom 5720 dual 1Gb controller.
What is the Dell part number for this network card?
The Dell part number is NP9WY.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.