Home / Dell PowerEdge R630 Servers / Dell PowerEdge R630 10SFF Barebone Server
Skip to product information
ServerDove

Dell PowerEdge R630 10SFF Barebone Server

Refurbished · Tested P/N: SRV-DELL-R630-10SFF-BARE
Regular price QAR 1,450.00
Regular price Sale price QAR 1,450.00
Sale Sold out

Price includes warranty

ServerDove

In stock · 6 available
Ask on WhatsApp
Fully tested Burn-in tested before dispatch
Warranty included Covered on every unit we sell
1-day delivery in Qatar Free over QAR 300
Expert support Configuration help on WhatsApp

Product Specification

Form Factor1U Rack Server
Power Supply2x 750W Hot Plug Power Supply
Remote ManagementiDRAC8
Drive Bays10x 2.5" SFF Drive Bays
Processor SupportDual Intel Xeon E5-2600 v3/v4 CPUs
CPU SocketLGA2011-3
Full specification 12 rows
Dell PowerEdge R630 10SFF 1U barebone rack server Refurbished · Tested
About this barebone

Dell PowerEdge R630 10SFF barebone server with dual 750W power supplies and heatsinks fitted, a refurbished 1U Xeon E5-2600 v3 and v4 platform.

The PowerEdge R630 is Dell's 13th generation 1U rack server, the direct predecessor of the R640. This 10SFF chassis has ten 2.5 inch hot-plug bays across the front and takes two Intel Xeon E5-2600 v3 or v4 processors in LGA2011-3 sockets, with 24 DIMM slots for DDR4 ECC Registered memory and iDRAC8 for remote management. It ships as a barebone with no CPU, no RAM and no drives, but unlike a bare chassis it comes with two 750W hot-plug power supplies and both CPU heatsinks already fitted. That makes it a practical base for buyers in Qatar who hold E5-2600 v3 or v4 processors and DDR4 RDIMMs from retired servers and want to put them back to work. A refurbished R630 from ServerDove's Doha stock is a low cost way to add a dual socket 1U node for virtualisation, web serving or a lab, on a platform whose parts are still plentiful.

Drive bays
10 x 2.5 inch
Power
2 x 750W fitted
Management
iDRAC8
SKU SRV-DELL-R630-10SFF-BAREForm factor 1U rack

Chassis and platform

The R630 was Dell's mainstream 1U server for the E5-2600 v3 and v4 era, and it remains common in racks across the region. Its 24 DIMM slots and dual socket layout give it the same memory ceiling as the 2U R730, in a chassis built for density rather than expansion.

Download spec sheet (PDF)
Processor
Processor support2 x Intel Xeon E5-2600 v3 or v4, LGA2011-3
Memory & storage
Drive bays10 x 2.5 inch SFF, hot-plug
Memory supportDDR4 ECC Registered, 24 DIMM slots
Chassis & connectivity
ModelDell PowerEdge R630 10SFF
Generation13th generation PowerEdge
Form factor1U rack server
ExpansionPCIe 3.0 slots
Power supplies2 x 750W hot-plug, fitted
Heatsinks2 x CPU heatsinks, fitted
Remote managementiDRAC8
Supplied configurationNo CPU, no RAM, no HDD
Power Supply2x 750W Hot Plug Power Supply
Included2x CPU Heatsinks

What you need to add

With power supplies and heatsinks already in place, the shopping list for this unit is shorter than for most barebones. Processors, memory and drives complete the build.

  • One or two Intel Xeon E5-2600 v3 or v4 processors; v4 parts need a BIOS that supports them, which any current R630 firmware does
  • DDR4 ECC Registered DIMMs, in matched sets of four per processor to use all four memory channels
  • 2.5 inch SAS or SATA drives in Dell 13th generation hot-plug caddies
  • A PERC RAID controller or HBA, unless the chassis already carries one
  • Additional network cards if two onboard ports are not enough

Mixing v3 and v4 processors in the same server is not supported, so buy a matched pair. Memory speed follows the processor: v4 CPUs run RDIMMs at up to 2400 MT/s, v3 CPUs at up to 2133 MT/s.

What is included

  • Dell PowerEdge R630 10SFF chassis with system board, backplane and fans
  • 2 x 750W hot-plug power supplies
  • 2 x CPU heatsinks

No processors, memory, drives or drive caddies are included.

Compatibility

The R630 uses the same processor, memory and drive parts as the rest of Dell's 13th generation servers, which keeps spares simple if you also run an R730 or T630.

ProcessorsIntel Xeon E5-2600 v3 and v4, LGA2011-3
MemoryDDR4 ECC Registered DIMMs, 288 pin, 2133 or 2400 MT/s
Drives2.5 inch SAS or SATA in 13th generation hot-plug caddies
RailsDell 1U sliding rail kit for the R630
Power suppliesDell 750W hot-plug units of the same rating as the fitted pair

Part numbers and identification

SKUSRV-DELL-R630-10SFF-BARE
ModelDell PowerEdge R630
AliasR630
Chassis variant10SFF
Variant spelling10 SFF

Condition & testing

  • Full hardware diagnostics and burn-in
  • Memory, storage and power supplies verified
  • Management controller reset, BIOS returned to defaults
  • Fully working; minor cosmetic marks are possible on refurbished units.
  • 6-month warranty on every unit we sell, with installation and support across Qatar.

Why buy refurbished

Enterprise hardware, tested in Doha, at a fraction of the price of new

Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.

Talk to our team

Tested before it ships

POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.

Same performance, lower cost

A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.

In stock, not on order

New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.

Warranty and local support

Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.