Couldn't load pickup availability
HPE DL380 Gen10 Cooling Fan Module
Price includes warranty
HPE
Product Specification
| Compatibility | HPE DL380 Gen10 |
| Feature | Hot Plug Server Cooling Fan |
| Feature | High Performance Cooling Module |
| Feature | Optimized Airflow Design |
| Feature | Server Thermal Management Component |
| Feature | OEM HPE Replacement Fan |
Refurbished · Tested
HPE ProLiant DL380 Gen10 cooling fan module, the hot-plug OEM replacement fan with tool-less fitting for the 2U server's fan bay, refurbished.
This is the cooling fan module for the HPE ProLiant DL380 Gen10, the hot-plug fan that sits in the row behind the drive cage and pushes air through the processors, memory and expansion cards of the 2U chassis. It is an OEM HPE replacement part with tool-less installation, refurbished, and it serves both to replace a failed fan and to fill the empty positions when a second processor is added to a server that shipped with one. Buyers in Qatar order it when iLO reports a fan fault on a DL380 Gen10 or when populating the second socket, and ServerDove keeps it in Doha stock alongside its DL380 Gen10 barebones and assembled servers.
FAN-HP-DL380-G10Specification
The DL380 Gen10 fan bay holds six modules, and HPE's firmware sets the required count from the processor and card configuration: a single processor server runs with four and refuses full performance with the second socket populated until all six are present. Each fan reports its speed to iLO, which flags a failing fan by position; the remaining fans speed up to compensate, which keeps the server safe but noisy until the fan is replaced. Modules are keyed and drop into any bay.
Buyers of ServerDove's DL380 Gen10 barebones, which are supplied with the fans for a single processor, can order the two extra modules from the same stock when fitting the second socket, and owners of the assembled DL380 Gen10 servers can keep a spare on the shelf. Replacing a fan takes under a minute and needs no downtime, which is the point of the hot-plug design.
Installation
Fans are hot-plug, so with the server running and the lid off, lift the failed module out by its tab and press the replacement into the same bay until it seats on its connector; iLO confirms it within seconds. When adding fans for a second processor, fill the two empty positions shown on the label inside the lid. Refit the lid promptly, as the chassis airflow depends on it.
Part numbers and identification
Condition & testing
- Tested in a compatible system
- Verified against the listed part number and specification
- Fully working; minor cosmetic marks are possible on refurbished units.
- 6-month warranty on every unit we sell, with installation and support across Qatar.
What ships with this part
Images are for illustration. The unit supplied is the one described in the specification and may differ cosmetically.
Our team in Doha answers specification and compatibility questions during working hours.
Ask on WhatsApp sales@serverdove.comWhat server is this fan module compatible with?
This cooling fan module is compatible with the HPE DL380 Gen10 server.
Is this an OEM HPE replacement fan?
Yes, it is listed as an OEM HPE replacement fan for compatible systems.
Does this fan support hot plug installation?
Yes, the product is described as a hot plug server cooling fan.
Is tool-less installation supported?
Yes, tool-less installation support is included in the product details.
What is the condition of this cooling fan module?
The product notes state that it is refurbished and tested.
What does refurbished mean at ServerDove?
Off-lease or decommissioned enterprise hardware that we clean, test and reset in Doha. Every unit goes through POST, burn-in, memory and drive checks and a power-supply check, with firmware and BIOS returned to defaults and drives securely erased.
Can I ask about the exact unit before I buy?
Yes. Message us the SKU on WhatsApp and we will confirm the condition and configuration of the unit in stock, with photos if you want them.
How fast is delivery in Qatar?
Orders ship from Doha and arrive within one working day anywhere in Qatar. Delivery is free on orders over QAR 300.
Can I collect in person?
Yes, from Nuaija Office 7, Doha, usually within 24 hours of ordering. Choose pick-up at checkout and we will message you when it is ready.
What warranty is included?
A 6-month hardware warranty from the delivery date, covering the unit as supplied. If a part fails we repair or replace it. Full terms are on the warranty page.
What is your return policy?
If the unit arrives faulty or not as described, tell us and we will collect it and replace or refund it. Full terms are on the Refund Policy page.
Which payment methods do you accept?
Visa, Mastercard and American Express online. Bank transfer is available for company orders; contact us for details.
Is the price shown the final price?
Yes. The price shown is what you pay; nothing is added at checkout, and every order ships with an invoice in your name or your company's name.
Why buy refurbished
Enterprise hardware, tested in Doha, at a fraction of the price of new
Every unit we sell has already proven itself in a data centre. We test it again, grade it, and back it with a warranty before it leaves our stock.
Tested before it ships
POST, burn-in, memory and power-supply checks on every unit. Anything that fails is repaired or pulled from stock, not sold.
Same performance, lower cost
A Xeon runs the same workloads whether it is new or two years old. Spend the difference on more CPUs, memory or storage.
In stock, not on order
New enterprise hardware can take weeks or months to arrive. Ours is on the shelf in Doha and delivered across Qatar within a day.
Warranty and local support
Every unit is covered. Installation, configuration and hardware support are handled by our own team in Qatar, not a call centre abroad.